Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Swap Shop (https://www.offshoreonly.com/forums/swap-shop-253/)
-   -   NEW Steering Actuator (https://www.offshoreonly.com/forums/swap-shop/273730-new-steering-actuator.html)

TEAMBAJA 04-09-2012 02:39 PM

4 left......

682gold 04-09-2012 08:22 PM

Garage sale
 
I have a few items I need to move and will send pics upon request. All items are plus ride.

Pair of K planes and pumps - $750
Pair of Imco steering rams, transom bracket and hoses-$875
Aluminum racing motor mount BBC-$175
Engine hatch w/ scoop-$150
Horsehoe exhaust pipe-$50
Pair of BBC Anchor manifolds/risers complete-$375
Two trim tab indicators-$45 each
Trim tab indicator cables-$75 set
1 Stainless marine riser-$120
2 sets of exhaust tips, 1 angled/ 1 straight-$125 each
Set of battery boxes-$50
2 oil coolers-$150 each
1 crossover-$85
Bravo 1 outdrive w/ nose cone just gone through- outside will need clean up-$850
Transom assembly w/ gimble ringvery good cond -$750
Transom assembly w/ gimble ring and trim arms that will need some work-$300 w/ pump $375
Bell housing cover-$50
Drive coupling-$50
As I find more I will post!!!
Also:

1989 Warlock Euro 24' with title, brand new aluminum fuel tank with sending unit, brand new floor and completely rebuilt tandem axle aluminum trailer. New bunks, rollers, lights, aluminum crossmembers etc. $3000. If you buy boat and trailer I have all guages that came out of it, aluminum angled bezels, trim tab indicators with a set of bennet trim tabs with pump, fuel fill and vent, bow lights and anything else that I have that goes with it.

682gold 04-09-2012 08:24 PM

oh sheite put in wrong spot

TEAMBAJA 04-09-2012 09:31 PM


Originally Posted by 682gold (Post 3659776)
oh sheite put in wrong spot

Whoa, thats the ultimate thread hi-jack! :ernaehrung004:

TEAMBAJA 04-13-2012 08:14 AM


Originally Posted by vrodn (Post 3658551)
I could use one, what's your contact info.

Still need one?

FuelinAround 04-13-2012 08:40 AM

Will this work on a dual motor setup? Mine has a long metal shaft that the steering cable runs through. ALso I don't see where the power steering hoses run into. I might be confusing parts somewhat.

endeavor1 04-13-2012 03:45 PM


Originally Posted by FuelinAround (Post 3662716)
Will this work on a dual motor setup? Mine has a long metal shaft that the steering cable runs through. ALso I don't see where the power steering hoses run into. I might be confusing parts somewhat.

It should. Not sure why it would not.

FuelinAround 04-13-2012 04:09 PM

I will take a picture of mine tonight and see if it matches up.

TEAMBAJA 04-15-2012 04:28 PM


Originally Posted by FuelinAround (Post 3662984)
I will take a picture of mine tonight and see if it matches up.

Did you check yours out yet?

Redhook98 04-15-2012 06:50 PM

I may need one. Just splashed today and see that my steering assembly is leaking. may be easier to replace then rebuild. I will let you know tomorrow.


All times are GMT -5. The time now is 08:17 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.