arandaz

Most of these parts have less than 10 hours. email at [email protected] if inbox fills. you pay shipping.

Dart Big M Block - $3500 (whole short block)
9.8" Deck Height
SRP Pistons
FlatTop - Dish - Dome
EAGLE 4340 FORGED STEEL Crank
4.25" Stroke
EAGLE 4340 H BEAM 6.385" Rods
KING ALECULAR PRO RACE Bearings
MAHLE Rings
block needs a little hone work but excellent shape

AFR BBC 305 cc as cast, Race ready, w/cnc chambers,
complete w/parts, Inconel valves, flat mill w/ head studs - $2300

Scorpion Marine Endurance BBC Rocker Arm 1.7RR/7/16 - $250
pushrods for this setup (Trend Perf.) - $150

Hydraulic roller lifters - $450

Bob Madura Marine Kinetics Roller Rocker Cam flat nose cam- $350
(Intake & Exhaust
LOBE SEPERATION = 112.1 CAM DEG
valve overlap= 23.7 CRANK DEG

INTAKE
valve open = 15.1 BTDC
• CENTERLINE---> 108 ATDC
valve close= 51.5 ABDC
DURATION-----> 246.5 CRANK DEQ
lobe lifts .37543 IN.
VALVE LIFT---> .63824 IN.
lobe area = 31.38 IN * DEG

EXHAUST
valve open = 81.4 BBDC
* CENTERLINE---> 116 BTDC
valve close= 8.7 ATDC
DURATION----> 250 CRANK DEG
lobe 1ift= .36445 IN.
VALVE LIFT---> .61956 IN.
lobe area= 31.04 IN * DEG)

Dominator 1050 carb rebuilt by Pro-Systems for this setup - $500
Brodix race intake - $175
Cometic head gaskets - $125
Melling oil pump - $75
Professional Products PowerForce Plus Harmonic Damper - $200
Taylor ThunderVolt 8.2mm Spark Plug Wire Set,8.2mm,black - $50
Moroso braided stainless dipstick - $30
Hi-Perf Power Steering & Engine Oil Cooler - $325
10" x 3" Dominator Flame Arrestor, Polished Stainless Steel - $125
BBC 10qt. Performance Oil Pan-Gen. 4 - $325
Xtreme High Flow 3/4" NPT Side Inlet Oil Block Adapter - $85
Polished aluminum valve covers with breathers - $175
BBC crossover kit with bypass, stainless - $250
Daytona Sensors CD-1 ignition w/ coil and harness (1 ignition system) - $450
Lightning headers with fully dry tails (grey) - $2000

Make offers! All is going on craigslist/ebay shortly.

dirty dan

Need some info on some of these parts .(716) 510-4411 dan

Xray50

want the carb. call me 561-251-4736

Ray

arandaz

Carb sold

supermx96

Interested on the Daytona ignition email send.

arandaz

Ignition sold

mustangmark

Info on cooler please.....I asked once on another post and got no responce. Thanks Mark

arandaz

pm sent. come on guys make some offers!

speedreeder

What is the bore size of the block? Do you know how much clearence the pistons have in the block? What is the piston numbers? Thanks

arandaz

540; .020; not sure what the piston numbers are.