Brodix Single Plane, 088 Heads, 177 Blower Intake, Crossover, ETC.
#1
Registered
Thread Starter
Join Date: Mar 2003
Location: cincinnati, ohio
Posts: 199
Likes: 0
Received 0 Likes
on
0 Posts
Brodix Single Plane, 088 Heads, 177 Blower Intake, Crossover, ETC.
I have the following for sale. All prices are plus shipping and firm.
088 Big Block Heads, had them checked last year and ran them, the water ports might need to be welded or epoxy but sealed fine for me with mr gaskets intake gaskets and silicone. 300.00
Brodix single plane intake for standard deck and 4150 carb. With 1" spacer. 150.00
Weiand 177 blower intake and the thermostat adapter, the blower surface will need to be cleaned up got a couple of nicks in it from shipping and bad packaging. 150.00
Crossover and thermostat housing with bypass hose, bypass fittings are NPT but I used the hose on it and worked fine, with 160 thermostat. 75.00
Gooseneck style thermostat housing. 50.00
Stainless thermostat housing with AN style outlets. 30.00
2 sets of 454 Mag rods and pistons out of Gen IV 454's. 100.00 a set
One set of Big Block flat valve covers. Need blasted and painted. Free if you pay the shipping
Mercuiser crank pulley smoothed a bit and painted blue. 15.00
Blower crank pulley 10 Rib. 30.00
4150 to dominator adapter 15.00
http://s1246.photobucket.com/albums/gg611/kunzme/
088 Big Block Heads, had them checked last year and ran them, the water ports might need to be welded or epoxy but sealed fine for me with mr gaskets intake gaskets and silicone. 300.00
Brodix single plane intake for standard deck and 4150 carb. With 1" spacer. 150.00
Weiand 177 blower intake and the thermostat adapter, the blower surface will need to be cleaned up got a couple of nicks in it from shipping and bad packaging. 150.00
Crossover and thermostat housing with bypass hose, bypass fittings are NPT but I used the hose on it and worked fine, with 160 thermostat. 75.00
Gooseneck style thermostat housing. 50.00
Stainless thermostat housing with AN style outlets. 30.00
2 sets of 454 Mag rods and pistons out of Gen IV 454's. 100.00 a set
One set of Big Block flat valve covers. Need blasted and painted. Free if you pay the shipping
Mercuiser crank pulley smoothed a bit and painted blue. 15.00
Blower crank pulley 10 Rib. 30.00
4150 to dominator adapter 15.00
http://s1246.photobucket.com/albums/gg611/kunzme/
#5
Registered
Thread Starter
Join Date: Mar 2003
Location: cincinnati, ohio
Posts: 199
Likes: 0
Received 0 Likes
on
0 Posts
#6
Registered
Thread Starter
Join Date: Mar 2003
Location: cincinnati, ohio
Posts: 199
Likes: 0
Received 0 Likes
on
0 Posts
http://i1246.photobucket.com/albums/...g?t=1335982224
http://i1246.photobucket.com/albums/...g?t=1335982207
http://i1246.photobucket.com/albums/...g?t=1335982189
http://i1246.photobucket.com/albums/...g?t=1335982167
http://i1246.photobucket.com/albums/...g?t=1335982150
http://i1246.photobucket.com/albums/...g?t=1335982127
Pics of heads.
http://i1246.photobucket.com/albums/...g?t=1335982207
http://i1246.photobucket.com/albums/...g?t=1335982189
http://i1246.photobucket.com/albums/...g?t=1335982167
http://i1246.photobucket.com/albums/...g?t=1335982150
http://i1246.photobucket.com/albums/...g?t=1335982127
Pics of heads.
#7
Registered
Thread Starter
Join Date: Mar 2003
Location: cincinnati, ohio
Posts: 199
Likes: 0
Received 0 Likes
on
0 Posts
send pics of heads paying attention to the areas you feel need welding to
[email protected]
[email protected]