Offshoreonly.com - COMP BBC Roller Cam.....Cheap!

I have a comp Roller cam for BBC, I bought it here from another member about 4 yrs ago for a project that never came together. At that time I was told it was in a mild 540 that made well over 600hp and was used dyno time only. It has been sitting in my shop since so time to go!

I am also told this is for Gen 6 blocks.

FIRST: I had this wrapped up an covered in oil but it still has a tiny bit of surface rust, it won't show in the pics but it is there, may wipe off, wear off, I don't know. Just want it known.

Next, i lost the cam card, so here is the info on it:

On the end I believe I am reading the following:

3120b-3372B

HR112

F9560-05

I had a post about this elsewhere on the site and RMbuilder from Marine Kinetics tells me the specs for this cam are:

304º/314º @ .006"
244º/258º @ .050"
161º/175º @ .200"
.383"/.380" Lobe
.651"/.646" 1.7 RR
112º Sep +4º

If you know other info or if I am wrong please correct me on any of this!

$125????