454 Short Block Fresh from Machine Shop
 

Gen V .060 454 4 bolt main block,block was decked,and align honed,has new cam bearings,brass freeze plugs,L2377F-.060 pistons,Chevy 7/16 Dimple Rods,steel crankshaft,all new bearings,rings,complete assembly was balanced, balancer and flywheel to go with it. just needs to be assembled.

Also going with it are a set of Oval port cast heads Casting number is 10052902, 2 cams one used crane cam, Crane Cams 132561 SC cam Hydraulic Flat Tappet, Advertised Duration 298/306, Lift .530/.551
One new Comp Cams 11-236-4.

Also have the oil pan and windage and more misc. parts to go with it

Will ship if necessary, figure the block will go on a pallet and the rest of the parts in 3 or 4 boxes separate or tied down to the same pallet.

Asking $2700 and that includes the ride as long as it in the continental U.S.
$2500 if you pick up.

Being transferred to another state for work, boat this was going to go in is all-ready sold and this is whats left, have no place to work on it where I'll be.

interested
 

sent pm

Sale Pending

Thanks
 

Carmen,
Great talking. See you Tuesday.
Thanks,
Doc

Deal fell thru, assembly is still for sale

How much for the pan and windage tray?

Would like this thing gone

2500 Shipped

Would u sell shortblock only?

Yes the shortblock can go by itself

What are the specs on those heads do you have any idea what the runners are or chambers are? Are these peanuts or large oval, all it says online is they are off a 427