Dana Exhaust Kit 496/502/454 FREE OVERNIGHT SHIP!!!
#1
Registered
Thread Starter
Join Date: Jan 2007
Posts: 1,667
Likes: 0
Received 0 Likes
on
0 Posts
Dana Exhaust Kit 496/502/454 FREE OVERNIGHT SHIP!!!
Here is a brand new set of Dana Marine 496/502 BBC Manifolds with used stainless Dana Risers.
Manifolds are #3 hard-anodized from inside out. They are powder coated sparkle red (exterior only). The manifolds have never seen salt; only fresh water time on the hose. I decided to buy headers at the last minute so they never got used in the boat. They were dipped in the treatment process before being coated so the water jackets are fully treated # 3.
Risers are in used condition but very nice with an 02 bung installed for tuning. Everything is leak-checked and there are no issues with this kit. Risers were used in salt but were also flushed religiously right after every use. They are pretty.
I’ll send the kit to you in 3 boxes UPS Red Label, over-night for $1,500. I can most likely ship same day as payment received. If not, I will ship very next day.
Kit comes with everything you need to install (gaskets, mounting hardware, oil filter mount, studs, bolts, washers etc.). Due to many variations in raw water systems in boats, you might have to acquire a piece of hose or a misc piece. I am selling everything it took to make it work in my boat. Yours could vary by a little bit.
I do NOT have the manifold-to-head gaskets. I only have the riser gaskets. I am including two sets. One is slightly used and able to be reused. There is also a brand new, never used set of riser gaskets included.
Manifolds are #3 hard-anodized from inside out. They are powder coated sparkle red (exterior only). The manifolds have never seen salt; only fresh water time on the hose. I decided to buy headers at the last minute so they never got used in the boat. They were dipped in the treatment process before being coated so the water jackets are fully treated # 3.
Risers are in used condition but very nice with an 02 bung installed for tuning. Everything is leak-checked and there are no issues with this kit. Risers were used in salt but were also flushed religiously right after every use. They are pretty.
I’ll send the kit to you in 3 boxes UPS Red Label, over-night for $1,500. I can most likely ship same day as payment received. If not, I will ship very next day.
Kit comes with everything you need to install (gaskets, mounting hardware, oil filter mount, studs, bolts, washers etc.). Due to many variations in raw water systems in boats, you might have to acquire a piece of hose or a misc piece. I am selling everything it took to make it work in my boat. Yours could vary by a little bit.
I do NOT have the manifold-to-head gaskets. I only have the riser gaskets. I am including two sets. One is slightly used and able to be reused. There is also a brand new, never used set of riser gaskets included.
Last edited by SDFever; 06-19-2012 at 12:56 AM. Reason: Info
#3
Registered
Thread Starter
Join Date: Jan 2007
Posts: 1,667
Likes: 0
Received 0 Likes
on
0 Posts
#4
Registered
Join Date: Jun 2012
Location: Iowa
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
I will buy them my number is 319-750-8896 just spoke with raylar he will be calling u
I will buy them my number is 319-750-8896 just spoke with raylar he will be calling u
Here is a brand new set of Dana Marine 496/502 BBC Manifolds with used stainless Dana Risers.
Manifolds are #3 hard-anodized from inside out. They are powder coated sparkle red (exterior only). The manifolds have never seen salt; only fresh water time on the hose. I decided to buy headers at the last minute so they never got used in the boat. They were dipped in the treatment process before being coated so the water jackets are fully treated # 3.
Risers are in used condition but very nice with an 02 bung installed for tuning. Everything is leak-checked and there are no issues with this kit. Risers were used in salt but were also flushed religiously right after every use. They are pretty.
I’ll send the kit to you in 3 boxes UPS Red Label, over-night for $1,500. I can most likely ship same day as payment received. If not, I will ship very next day.
Kit comes with everything you need to install (gaskets, mounting hardware, oil filter mount, studs, bolts, washers etc.). Due to many variations in raw water systems in boats, you might have to acquire a piece of hose or a misc piece. I am selling everything it took to make it work in my boat. Yours could vary by a little bit.
I do NOT have the manifold-to-head gaskets. I only have the riser gaskets. I am including two sets. One is slightly used and able to be reused. There is also a brand new, never used set of riser gaskets included.
Manifolds are #3 hard-anodized from inside out. They are powder coated sparkle red (exterior only). The manifolds have never seen salt; only fresh water time on the hose. I decided to buy headers at the last minute so they never got used in the boat. They were dipped in the treatment process before being coated so the water jackets are fully treated # 3.
Risers are in used condition but very nice with an 02 bung installed for tuning. Everything is leak-checked and there are no issues with this kit. Risers were used in salt but were also flushed religiously right after every use. They are pretty.
I’ll send the kit to you in 3 boxes UPS Red Label, over-night for $1,500. I can most likely ship same day as payment received. If not, I will ship very next day.
Kit comes with everything you need to install (gaskets, mounting hardware, oil filter mount, studs, bolts, washers etc.). Due to many variations in raw water systems in boats, you might have to acquire a piece of hose or a misc piece. I am selling everything it took to make it work in my boat. Yours could vary by a little bit.
I do NOT have the manifold-to-head gaskets. I only have the riser gaskets. I am including two sets. One is slightly used and able to be reused. There is also a brand new, never used set of riser gaskets included.
#5
Registered
Join Date: Jun 2012
Location: Iowa
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
exhaust
Here is a brand new set of Dana Marine 496/502 BBC Manifolds with used stainless Dana Risers.
Manifolds are #3 hard-anodized from inside out. They are powder coated sparkle red (exterior only). The manifolds have never seen salt; only fresh water time on the hose. I decided to buy headers at the last minute so they never got used in the boat. They were dipped in the treatment process before being coated so the water jackets are fully treated # 3.
Risers are in used condition but very nice with an 02 bung installed for tuning. Everything is leak-checked and there are no issues with this kit. Risers were used in salt but were also flushed religiously right after every use. They are pretty.
I’ll send the kit to you in 3 boxes UPS Red Label, over-night for $1,500. I can most likely ship same day as payment received. If not, I will ship very next day.
Kit comes with everything you need to install (gaskets, mounting hardware, oil filter mount, studs, bolts, washers etc.). Due to many variations in raw water systems in boats, you might have to acquire a piece of hose or a misc piece. I am selling everything it took to make it work in my boat. Yours could vary by a little bit.
I do NOT have the manifold-to-head gaskets. I only have the riser gaskets. I am including two sets. One is slightly used and able to be reused. There is also a brand new, never used set of riser gaskets included.
Manifolds are #3 hard-anodized from inside out. They are powder coated sparkle red (exterior only). The manifolds have never seen salt; only fresh water time on the hose. I decided to buy headers at the last minute so they never got used in the boat. They were dipped in the treatment process before being coated so the water jackets are fully treated # 3.
Risers are in used condition but very nice with an 02 bung installed for tuning. Everything is leak-checked and there are no issues with this kit. Risers were used in salt but were also flushed religiously right after every use. They are pretty.
I’ll send the kit to you in 3 boxes UPS Red Label, over-night for $1,500. I can most likely ship same day as payment received. If not, I will ship very next day.
Kit comes with everything you need to install (gaskets, mounting hardware, oil filter mount, studs, bolts, washers etc.). Due to many variations in raw water systems in boats, you might have to acquire a piece of hose or a misc piece. I am selling everything it took to make it work in my boat. Yours could vary by a little bit.
I do NOT have the manifold-to-head gaskets. I only have the riser gaskets. I am including two sets. One is slightly used and able to be reused. There is also a brand new, never used set of riser gaskets included.
#6
Registered
Thread Starter
Join Date: Jan 2007
Posts: 1,667
Likes: 0
Received 0 Likes
on
0 Posts
#7
Registered
Thread Starter
Join Date: Jan 2007
Posts: 1,667
Likes: 0
Received 0 Likes
on
0 Posts
Sold
Thanks Cory! I should have no problem shipping tomorrow if you guys are able to send payment tonight or early tomorrow am. I just can not imagine a 70mph PONTOON! I lost a bet in Havasu with Eddie. I thought there was another one with a 496 and he wound up calling it right with a 350.
You'll have some fun!
Cheers!
You'll have some fun!
Cheers!
Last edited by SDFever; 06-19-2012 at 06:55 PM.
#8
Registered
Thanks Cory! I should have no problem shipping tomorrow if you guys are able to send payment tonight or early tomorrow am. I just can not imagine a 70mph PONTOON! I lost a bet in Havasu with Eddie. I thought there was another one with a 496 and he wound up calling it right with a 350.
You'll have some fun!
Cheers!
You'll have some fun!
Cheers!