B&m 250 blower, Nickerson carb...everything needed to bolt on and go!
 

Well, here it is:

B&m 250 blower (3.65 upper pulley)

rectangular port, std. deck height intake for bbc (unported)

thermostat housing

serpintine belt (approx. 25 hrs. on it)

tentioner

Lower pulley and spacer (from a B&m 420 blower. I preferd the 6 bolt pattern over the 3 bolt)

3 groove v belt pulley

4150 to 4500 carb adaptor

Nickerson Stage 5 Dominator set up for my combo (this carb cost me $1,400.00 alone).

Holley fuel regulator

-8 steel braided fuel lines and xrp fittings from regulator to carb

Billet fuel regulator bracket (mounts to two of the carb studs)

Billet throttle bracket from Cp Performance

K&n air cleaner

Stainless steel carb studs

*I also opened up the top plate of the blower at the carb base and carb adaptor to remove the "step" commonly found when running an adaptor and Dominator*

http://i986.photobucket.com/albums/a...ps87c14a93.jpg

http://i986.photobucket.com/albums/a...ps3c17a73d.jpg

http://i986.photobucket.com/albums/a...ps89caedcd.jpg

http://i986.photobucket.com/albums/a...ps04904e2d.jpg

http://i986.photobucket.com/albums/a...pseaaddd43.jpg

$2,700.00 + shipping (US Postal Money order only if shipped or cash and pick it up!)

This is an awesome kit and runs great on my 502! At 6200 rpm I'm seeing 4.2 pounds of boost. The carb has roughly 25 hrs on it, the blower is clean and the teflon is in good shape! I'm upgrading to a ProCharger so this one is up for sale! There's a bit of money invested in all of this so please don't lowball me with a crazy offer. Thanks, Mark