|
Ship Load Of Parts..
6 Attachment(s)
Listing for a friend.... 177 Blower BBC intake, BBC/Bravo coupler, BBC starter, 454 wiring harness including electronics.....,alternator,bracket and power steering pump (no lines included)...everithing off a 525SC and in very nice shape.
PM me for prices |
More parts
5 Attachment(s)
.....177 Blower water neck, used forged pistons and dimple rods, 088 square port heads complete with Crane rockers, hamburg BBC pan 8 Qt pan, 454 4 bolt block and steel crank.
|
more
5 Attachment(s)
more....Holley billet distrib, tall deck. like new with new cap and rotor. aluminum Dominator throttle bracket, Stainless crossover thermo housing and braided line, 1050 Dominator...old, needs freshen or for parts.
|
more
5 Attachment(s)
more...Dart dominator intake, tall deck...Pheonolic spacer dominator....Dart dominator intake short deck ...both nice. short deck has distrib hold down thread chip.
|
more
3 Attachment(s)
more...hatch....hole needs to be 16 3/4 by 16 3/4. used but nice.
|
how much for the bracket and the coupler email [email protected]
|
How much for PS pump [email protected]
|
How much for the hatch?
|
How much for the wiring harness?
|
intake
how much for the manifold with the spacer
|
how much for the dominator throttle bracket.
|
Would you part the Alt/PS bracket? My buddy needs one.
|
Originally Posted by pantera 28
(Post 3862794)
how much for the bracket and the coupler email [email protected]
Coupler 100.00 Plus ship |
|
Originally Posted by boats74
(Post 3862811)
How much for the hatch?
|
Originally Posted by Sunrocket24
(Post 3862853)
How much for the wiring harness?
|
Originally Posted by tunertech
(Post 3862855)
how much for the manifold with the spacer
|
Originally Posted by mike tkach
(Post 3862866)
how much for the dominator throttle bracket.
|
Originally Posted by JordanFTW
(Post 3862895)
Would you part the Alt/PS bracket? My buddy needs one.
|
Originally Posted by kreed
(Post 3862911)
Will let u know tomorrow.
|
Originally Posted by kreed
(Post 3862917)
20. Plus ship
|
Originally Posted by Sunrocket24
(Post 3862939)
Sounds good! What about the 177 blower water neck, is it salt or fresh water use and price?
|
Originally Posted by mike tkach
(Post 3862942)
sold,how would you like me to make payment?
|
How much for the starter??
|
Originally Posted by HEDGEHOGER
(Post 3863047)
How much for the starter??
|
Originally Posted by kreed
(Post 3863043)
50.00 plus shipping for the water neck, fresh water.
|
Short deck Dart intake and carb sold....
tall deck still available. 150.00 |
how much for the blower is it complete ,
|
Originally Posted by Sunrocket24
(Post 3863060)
I will take it, still interested in the wiring harness also.
|
Originally Posted by innerrage
(Post 3863113)
how much for the blower is it complete ,
|
ttt
|
Parts shipping tomorrow , Been buried in snow . Thanks for being patient
|
Dom throttle bkt sold and blower water neck sold....
New price on the wiring harness for those interested....250.00 |
454 "525SC" long block
engine needs a freshen up, spun a bearing 4 bolt block 088 heads-Crane roller rockers steel crank(needs turn) dimple rods forged sealed power pistons stock oil pan 177 Blower intake(no blower) engine apart 1000.00 |
ttt
|
Both intakes sold , carb sold ,oil pan sold, blower water neck sold ,throttle bracket sold Distributor sold . Still have ,crossover water neck with hose 65$ ,Wiring harness off a 525 sc 200$ , Factory distributor with a sealed new eye in it last season 100$ and alternator 50$
|
| All times are GMT -5. The time now is 01:46 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.