![]() |
i need some remote oil/fuel adapters, steering column,trim indicators, swim step. [email protected]
|
Originally Posted by RT930turbo
(Post 3880169)
Is this your 38?! ...either way, does it have AC?
Thanks, Kelly. I've gotten quite a few emails and replies on the forum, but unfortunately I'm not terrbly smart on computers and have a dumb phone. This or next couple of evenings after work I'll have my son shoot some pic's with his smart phone to forward or post on the board. Meanwhile I'll try to answer and post links if it's something I have in Photobucket turbo, I have an AC but need to remove it to test it, my guess is that it'll work pantera, Here's pic's of my 4 multicolor McCleod electric bolsters, I also have 2 of the same in white. I'm flexible as to which 2 I place in my boat. If someone wants 4 matching I'll install white or I'll sell 2 white and 2 colored http://i7.photobucket.com/albums/y28.../IMG_15202.jpg cobra, I have an anchor hatch and 4 deck hatches I'll get pic's for. fenderjack, I don't have the transom assemblies, pumps, k-planes, or hydraulic steering components. mittens, I'm pretty sure there are AC vents. liberator, The hatch hinges are large beefy stainless 2 arm style. The hatch is in excellent shape with white upholstry and has a chrome looking diamond plate laminate underneath, looks cool. I may sell mine and replace it with this one and mine is white with new upholstry from last winter. carolinacopters, I'm pretty sure at the storage facility I have trim indicators, instrument cluster w/ gauges, and throttles. schiada, I have a remote adaptor for fuel filter to mount on bulkhead behind rear seat, steering column but I'll need to see how cleanly they removed the cables. They did quite a hack job when they cut out the transom and took the drives as a whole still attached to the transom instead of disassembling everything. You guys will have to excuse me if I'm a slow to respond. In my business, pool construction, we're starting to pick up quite a bit and I'm on the road from before daylight until after dark running jobs every day if it's not raining. I also have some other stuff too. 2 B1 new style sweptback outdrives, with less than 80 hours per seller a couple of years ago , oil changed twice w/ bravo shop synthetic neo oil??? 38' aluminum trailers 1 18000lb McClain triple axle, electric over hydraulic dual axle brakes, 1 mounted spare 1 18000lb Towmaster by Fabrique triple axle, electric over hydraulic brakes on all three axles with dual mounted spare, mounted toolbox, and an electric jack. And all kinds of stuff from the salon, galley, and head, plus lots of through hull water outlets, popup cleats, handrails etc... See ya, Kelly |
No problem, thanks for the update.
|
what do you want for the drives? [email protected]
|
McClain trailer aluminum? Can bunks be configured for stepped hull?
|
Thanks, kelly! Let me know... Seven four zero 504 eight eight five five
|
How Much the pair of White bolster seat ?
|
I do need one or 2 of the round inside cabin AC vents. I am addinga vent in my V birth so a factory vent would help it look stock.
The black bimini top, I could be interested in. BUT i need to know how wide the legs are? and how far apart are the legs on each side. Let me clarify Back left leg ---to back right leg. need this measurement. Front left leg ---to Front right leg. need this measurement. Back left leg ----to Front Left leg. need this measurement. Then I can see if i could mount it on my 342. so all these measurements are from where they meet the fiberglass boat. |
Ok, still interested. Let me know.
Thanks! |
| All times are GMT -5. The time now is 06:56 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.