1994 25' Powerplay I/O - No Power
#1
1994 25' Powerplay I/O - No Power
Watiting on the last shipment of parts before I do the engine install but figured I would post here to see if there is any interest in the boat minus power.
Boat is VERY clean and in great shape. Only water damage I could find was under a battery box that pulled loose and that has already been fixed.
Boat is complete with some options:
Gaffrig Gauges
Latham dual ram steering
Silver powdercoated platform and tabs
All white interior
Hydraulic hatch ram
$17,000 with shop trailer currently under it, no power
[email protected]
Neil
Boat is VERY clean and in great shape. Only water damage I could find was under a battery box that pulled loose and that has already been fixed.
Boat is complete with some options:
Gaffrig Gauges
Latham dual ram steering
Silver powdercoated platform and tabs
All white interior
Hydraulic hatch ram
$17,000 with shop trailer currently under it, no power
[email protected]
Neil
#2
I've gotten a few emails - to clarify this boat will be complete minus power including the front motor plate to make install even easier. I have drive, motor and exhaust options if needed.
I figure this would give the guys a shot that have power but looking for a great hull to get up and running.
Once the power is installed it will go in the classifieds
I figure this would give the guys a shot that have power but looking for a great hull to get up and running.
Once the power is installed it will go in the classifieds
#4
Hello,
Could you e-mail pics of the boat on the trailer? Engine compartment and transom? Any stress cracks or gelcoat issues?
Does it have a std. Bravo transom assembly or HD and what's condition?
Cost to include the drive?
Thanks! email: [email protected] 916-677-6621
Could you e-mail pics of the boat on the trailer? Engine compartment and transom? Any stress cracks or gelcoat issues?
Does it have a std. Bravo transom assembly or HD and what's condition?
Cost to include the drive?
Thanks! email: [email protected] 916-677-6621
#7
Toxic FORMULA
Platinum Member
Gee, I got a 683 HP 555cu in with 714 ft lbs and dyno time only unfortunately I'm not looking for a project at this time
Last edited by mopower; 04-02-2013 at 07:14 PM.
#9
Registered
Hey Mo nice engines and they are not pink