hp 500 cams complete w lifters and pushrods
 

i have 2 complete hp 500 carb cams and lifters .and the crane push rods $250 per set all in nice cond

do these include the dog bones and retainers? I have a gen 5 non roller, so I need everything, and will you split up the pair?

i do have the dog bones and retainers .however i dont think gen 5 has holes to bolt the retainer down .

and yes i will split them

you need to use a retrofit tappet with that Gen V, as the wishbone has no way to attach to the block

so
 

I'm a mechanic and own a 98 7.4l in a powerquest, will these fit i'm assuming they came out of a 454 mine is a gen 6. What was diff in the 500 hp setup. Thanks for feedback

1 set sold .1 set left

Bump

Assuming your engine has the forged internals with 8.75:1 comp ratio pistons the HP500 cam will get you one step closer to the Merc HP450 as it was called.

bump

bump