|
bbc parts
9 Attachment(s)
I have lots of big block parts laying around that need to go.
some parts were off my running gen vi 509 efi motor before it was taken apart. Some stuff was bought for a motor that i was going to have built but changed my mind. 2) Mercruiser 502 efi wiring harnesses complete w/computer ect...$325ea. 2) distributors w/wires....$40 starter....(sold) have another one in post #11 gen vi 8 qt oil pan with drain hose....$80 bell housing....$90 fly wheel...$50 coupler...$90 used crane 168731 hyd roller cam....$150 gm 502 forged crank needs to be polished...$150 8) srp flat top pistons .30 over w/gm dimple rods...make offer! one engine set of valves from gm 088 heads some look great some have some pitting on them... make offer! gm roller lifters, comp rods, crane gold rockers...make offer! complete serp system, alternator, power steering pump, sea pump, idler pulley&bracket, water circ pump, and crank pulley $250. Mercruiser/merc racing blue valve covers, off hp 500 great shape....$175 Hp 500 style dart intake, carb, flame arrestor, greatt shape ,new powdercoat, fresh rebuild on the carb over 1k invested $650 MSD ignition system, new billet distributor, rev limiter, and blue box with extras! .....$450 More pics and parts listed in post # 11 I also have some small items like timing chain covers, balancers, windage trays, oil lines, oil filter housings, fuel filter housings, cool fuel setups. the list could just keep going.... I have more parts and pics that i will post later. All parts are plus shipping. |
Interested in the valves. What size are they? Brand?
|
Originally Posted by dvalen11
(Post 3915541)
Interested in the valves. What size are they? Brand?
exhaust 1.88 I am not sure what brand they are. there is no markings on them and they were in the heads/motor when i bought it. |
I'll take the starter, sent you a pm.
Thanks, Dale |
Looking for 2.250 intake maybe i could use the exhaust ill have to measure them tonight. Ill let ya know
|
Originally Posted by dvalen11
(Post 3915603)
Looking for 2.250 intake maybe i could use the exhaust ill have to measure them tonight. Ill let ya know
Thanks. |
i need the flywheel housing, flywheel, and coupler. any pix? any way to find out how much shipping would be to 90802? ground is fine.
pm me details/paypal. thank you. |
Originally Posted by ka0tyk
(Post 3915802)
i need the flywheel housing, flywheel, and coupler. any pix? any way to find out how much shipping would be to 90802? ground is fine.
pm me details/paypal. thank you. Thanks. |
Paypal sent for starter.
Thanks, Dale |
Originally Posted by daleroger
(Post 3915958)
Paypal sent for starter.
Thanks, Dale I will get it shipped out today. Thanks Dale. |
4 Attachment(s)
I found another starter works fine.....$40
timing chain covers.....make offer! 90% complete serp system missing alternator and bracket the complete set is on hold for another member....$225 valve covers nice.....$175 pics of msd setup, carb and intake, and other parts comming soon. thanks. |
Interested in the the starter.
|
Interested in the serp setup. PM sent
|
Originally Posted by bajaboy217
(Post 3915524)
I have lots of big block parts laying around that need to go.
some parts were off my running gen vi 509 efi motor before it was taken apart. Some stuff was bought for a motor that i was going to have built but changed my mind. 2) Mercruiser 502 efi wiring harnesses complete w/computer ect...$325ea. 2) distributors w/wires....$40 starter....(sold) have another one in post #11 gen vi 8 qt oil pan with drain hose....$80 bell housing....$90 fly wheel...$50 coupler...$90 used crane 168731 hyd roller cam....$150 gm 502 forged crank needs to be polished...$150 8) srp flat top pistons .30 over w/gm dimple rods...make offer! one engine set of valves from gm 088.. Sold gm roller lifters, comp rods, crane gold rockers...make offer! complete serp system, alternator, power steering pump, sea pump, idler pulley&bracket, water circ pump, and crank pulley $250. Mercruiser/merc racing blue valve covers, off hp 500 great shape....$175 Hp 500 style dart intake, carb, flame arrestor, greatt shape ,new powdercoat, fresh rebuild on the carb over 1k invested $650 MSD ignition system....sold More pics and parts listed in post # 11 I also have some small items like timing chain covers, balancers, windage trays, oil lines, oil filter housings, fuel filter housings, cool fuel setups. the list could just keep going.... I have more parts and pics that i will post later. All parts are plus shipping. Msd ignition sold Bbc valves sold |
I have lots of big block parts laying around that need to go.
some parts were off my running gen vi 509 efi motor before it was taken apart. Some stuff was bought for a motor that i was going to have built but changed my mind. 2) Mercruiser 502 efi wiring harnesses complete w/computer ect...$325ea. 2) distributors w/wires....$40 starters....(sold) gen vi 8 qt oil pan with drain hose....$80 bell housing....sold fly wheel...sold coupler...sold used crane 168731 hyd roller cam....$150 gm 502 forged crank needs to be polished...$150 8) srp flat top pistons .30 over w/gm dimple rods...make offer! one engine set of valves from gm 088.. Sold gm roller lifters, comp rods, crane gold rockers...make offer! complete serp system, alternator, power steering pump, sea pump, idler pulley&bracket, water circ pump, and crank pulley $250......pending payment Mercruiser/merc racing blue valve covers, off hp 500 great shape....$175 Hp 500 style dart intake, carb, flame arrestor, greatt shape ,new powdercoat, fresh rebuild on the carb over 1k invested $650 MSD ignition system....sold More pics and parts listed in post # 11 I also have some small items like timing chain covers, balancers, windage trays, oil lines, oil filter housings, fuel filter housings, cool fuel setups. the list could just keep going.... I have more parts and pics that i will post later. All parts are plus shipping. |
timing chain covers.....make offer!
90% complete serp system...sold valve covers nice.....$175 pics of, carb and intake, and other parts comming soon. thanks. Attached Thumbnails |
Send me pics of the oil pan
|
5 Attachment(s)
more pics...
Corsa silent choice system, great shape. I have a y pipe if needed....$350 |
I would like the mercruiser valve covers, contact me please at 513 800 3957 I dont always get on off shore only to check mail, but i would like to get these for sure. Had my ignition system exhaust manifolds and valve covers stole right off boat in storage over winter. Got some of it replaced already, still looking for ignition system and really I don't need these covers but they look real nice for sure. Will they work with a set of imco powerflow maifolds do you know. Ill be looking forward to hearing from ya. Thanks Steve
|
price me the intake as well off this set up, Not necessarily interested in carb, but would like to get the flame arrestor and two braides lines with the valve covers. If possible. Please contact me 513 800 3957 up late usually so text or call.
Total list of interested parts, Intake Flame arrestor valve covers braided lines off arrestor Not looking for a hand out but a good deal would be greatly appreciated, insurance didnt cover my loss. Thanks again. |
How much for the crane gold roller rockers? And what ratio?
|
Originally Posted by tdpb2008
(Post 3922129)
How much for the crane gold roller rockers? And what ratio?
Thanks. |
Originally Posted by chaparral2300
(Post 3922012)
price me the intake as well off this set up, Not necessarily interested in carb, but would like to get the flame arrestor and two braides lines with the valve covers. If possible. Please contact me 513 800 3957 up late usually so text or call.
Total list of interested parts, Intake Flame arrestor valve covers braided lines off arrestor Not looking for a hand out but a good deal would be greatly appreciated, insurance didnt cover my loss. Thanks again. I have a deal pending on the valve covers. I will give you a call, Thanks Derek. |
crankshaft
Hello interested in the crankshaft please e-mail me [email protected] or call me 727-798-4388 or PM me thanks will pay with pay pal and let me know shipping my zip is 33773 FLA
|
hi i am i nh can i call you interested in parts my # is 603-279-7676
|
do you have the Merc remote oil filter mounts and hoses, need 2 of them
|
interested in parts 603-279-7676
|
Originally Posted by tcwcar
(Post 3924102)
do you have the Merc remote oil filter mounts and hoses, need 2 of them
I will get back to you soon. Thanks Derek. |
Valves ....sold
Flywheel, coupler, and bell housing... sold Both serp systems.....sold Msd setup....sold Valve covers....sold Starters....sold Thanks OSO. Still have other parts available. |
Originally Posted by tcwcar
(Post 3924102)
do you have the Merc remote oil filter mounts and hoses, need 2 of them
Derek. |
I need the silent choice diverters and y pipe. Pm me [email protected]
|
Sorry about that Derek, had to go out of town last minute, do you still have the oil remotes? also need 2 distributors for 500efi if you have any...Joe
|
Cam available?
|
| All times are GMT -5. The time now is 07:08 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.