850SCI Cam shafts
 

Qty 2 - 850SCI Mercury Cam shafts (New)

$550.00/ea

ttt

ttt

ttt

ttt

If you have the specs handy can you post. I know they changed and went to roller with the 850 and did a quick search for them but what I found did not look right.
Tks
John

I thought they were all roller cam shafts.............I purchased the engines NEW and never ran them as 850SC engines. Actually, I had them upgraded to 1200HP by changing cams, springs and some reprogramming. Could you tell if I sent you a picture ?

No I believe 800 sc - 575 sc was the hyd flat tapped they used for years. I originally thought the 850 sci was the same as the 1075 however the 1075 is a solid roller I do believe.

850SCI, 1075SCI and 1200SCI are all he same except for the cams and some ECM programming. I am 99% sure they are all solid lifter cams

I think they are the same camshafts for all of them and they use different pulleys on the superchargers and different ecu.
They do not have a distributor gear and a fuel pump lobe.

Ah. Good point. Never gave that a thought. I found an older post from bob M regarding cam/lobe. This sound correct? Not sure what he meant by the 850 cam but I honestly believe he was referring to the 800 which was different.

Cant read it but they are solid lifters on all of them. I have the specs on them I degreed one and wrote it down.

ttt