Pair SC 502 Long Blocks - The Good and the Bad (but not ugly)
#1
Registered
VIP Member
Thread Starter
Join Date: Aug 2008
Location: Cleveland, Ohio
Posts: 292
Likes: 0
Received 0 Likes
on
0 Posts
Pair SC 502 Long Blocks - The Good and the Bad (but not ugly)
Selling single 502 Bowtie motor with Blower Shop 6v71 blower mated to matching Blower Shop intake. Engine came in boat with receipt for $17,000 refresh (for two - other sold) by Richie Zul in 2011 and dyno sheets showing roughly 750hp. Hydro cam and lifters. Engine is strong and ready for your accessories.
Bowtie blocks and heads.
Went to bigger power as 750 is not enough for my application (is it ever?).
Long block pan to flame arrestor and includes dipstick, Bravo water pump, bell housing, flywheel, and blower belt as shown - no wiring, ignition, etc. Please let me know if you need additional info or pictures. Looking for $9,500. Crating/shipping from 44004 at cost. Please PM with any questions.
Thanks for looking![ATTACH=CONFIG]502531[/ATTACH][ATTACH=CONFIG]502532[/ATTACH][ATTACH=CONFIG]502533[/ATTACH][ATTACH=CONFIG]502534[/ATTACH]
Bowtie blocks and heads.
Went to bigger power as 750 is not enough for my application (is it ever?).
Long block pan to flame arrestor and includes dipstick, Bravo water pump, bell housing, flywheel, and blower belt as shown - no wiring, ignition, etc. Please let me know if you need additional info or pictures. Looking for $9,500. Crating/shipping from 44004 at cost. Please PM with any questions.
Thanks for looking![ATTACH=CONFIG]502531[/ATTACH][ATTACH=CONFIG]502532[/ATTACH][ATTACH=CONFIG]502533[/ATTACH][ATTACH=CONFIG]502534[/ATTACH]
Last edited by DucBoy; 06-13-2013 at 06:13 PM. Reason: Sold One!
#6
Registered
VIP Member
Thread Starter
Join Date: Aug 2008
Location: Cleveland, Ohio
Posts: 292
Likes: 0
Received 0 Likes
on
0 Posts
Okay, second motor is available again (guy never came out - sold one of his pair and no longer needed a single). Second motor needs rebuilt due to melted piston resulting from broken spring - no apparent damage to cylinder. One head also needs rebuild (comes with new springs, locks, and retainers - will need new valve and valve guide). I have pulled both heads and can send detailed pictures upon request. . $5,000 for the hurt engine, $14,000 for the pair (plus shipping/crating).