gerg g.

iTrader: (1)

holley 800 cfm dyno time only #9022 $400. 502 mag mpi k&n filter $200. merc 1993 502 mpi pump pump new used 3 months $400. 502 mag injectors cleaned and flowed $100. 502 mag mpi t stat housing $25. also have a 502 mag square port head fresh valve job no springs. all parts + shippimg.

jvcobra

Do you have any documentation on the injectors? Interested in the set.

gerg g.

iTrader: (1)

i will look. heres the story had my 502 re built to take a procharger. so i sent the injectors out to witch hunter performance to have them sonic cleaned and flow checked all was good thay did send me a graph of the flows i will see if i can find it. while dynoing the motor we found i needed larger injectors. so we removed them and they have been in a bag since. the bill for the injector work was more than what i am asking for them. thanks for looking.

gerg g.

iTrader: (1)

any good offers

Budman II

iTrader: (1)

I'll take the T-stat housing!

motor

iTrader: (3)

I was just about to say the same
Oh well

jvthundercat

iTrader: (9)

What year 502? I might be interested in the K & N but I need two of them and that does not look like the one they sell. Is the adaptor from someone else?

gerg g.

iTrader: (1)

it is off a 1993 502 mpi mag. i believe i ordered it from cp performance a few years ago.

jvcobra

Any luck finding the flow graphs?

Budman II

iTrader: (1)

Steve, I kind of owe you one for helping me out with the 5-inch hose, so if you have a need for the T-stat housing, go ahead and take it. It's the right thing to do. I just wanted to clean up the "octopus" of water lines from the old-style T-stat housing on my engine.