Oil Cooler / PS Cooler combo 700HP
#1
Gold Member
Gold Member
Thread Starter
iTrader: (2)
Join Date: Feb 2007
Location: SL,UT
Posts: 374
Likes: 0
Received 0 Likes
on
0 Posts
Oil Cooler / PS Cooler combo 700HP
I have a nice thermostatically controlled (3"x 22" overall) power steering and engine oil combination cooler.
1" npt water, 3/4" npt engine oil, 3/8" power steering fittings, rated for 700hp.
Cooler is off of a good running engine (its clean) and never had any trash ran through it. I'd say its better than
new since its been flushed with hot engine oil so there isn't a chance of any manufacturing debris in it...
Painted metallic black, paint is in great shape except where the mounting rings were.
$300 obo.
CP Performance P/N 620-750 ($489.99)
1" npt water, 3/4" npt engine oil, 3/8" power steering fittings, rated for 700hp.
Cooler is off of a good running engine (its clean) and never had any trash ran through it. I'd say its better than
new since its been flushed with hot engine oil so there isn't a chance of any manufacturing debris in it...
Painted metallic black, paint is in great shape except where the mounting rings were.
$300 obo.
CP Performance P/N 620-750 ($489.99)
Last edited by DesertRage; 08-06-2013 at 06:09 PM.
#5
Registered