Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Swap Shop (https://www.offshoreonly.com/forums/swap-shop-253/)
-   -   HP500 engine and 502 parts lot (https://www.offshoreonly.com/forums/swap-shop/302604-hp500-engine-502-parts-lot.html)

PurdueCAT 09-06-2013 01:01 PM

HP500 engine and 502 parts lot
 
I have the following for sale as a lot. I am hopefully going to superchared 502's One money takes all.

1 complete hp500 complete from carb to pan. No accessories. It is .034 over making it a 509ci and has Keith black forged high compression pistons (IC807 0.034). The heads were brand new gm 088 castings with the larger valves installed. It has the standard hp500 roller cam, comp hydraulic roller lifters, and 1.7 roller rockers. Engine has approx 30 hours on it since being built. No exhaust.

1 hp500 502 short block that has a busted piston and two broken rods. Two cylinders appear to have damage but may be able to be sleeved? Crank may be junk or may be able to be turned down. It has a crane 169611 hp500 hydraulic roller cam. I have the Intake and carb that came off this engine as well.

1 set of used Crane 900-16 roller lifters

1 set of low hour PBM link bar roller lifters (PBMRL931)

1 low hour 169611 hp500 hydraulic roller cam

1 set of Icon (keith black) 10.5-1 pistons .034 overbore 3-4 of these are flawles and a couple have some knicks in the top

2 sets of gm 088 heads, both sets may need some welding, 2 heads worse than the others. All will need new exhaust valves and spring sets. All have screw in studs with guide plates.

I set of BBC hp500 roller rockers 1.7 ratio

1 502 melling oil pump new in the box

$7000 takes all located in lafayette Indiana

http://s3.amazonaws.com/s3.racingjun...0-502509ci.jpg

PurdueCAT 09-06-2013 01:02 PM

Engine pictured is still in boat and can be fired in my driveway on the hose.

trex232 09-06-2013 02:27 PM

how much for carb and flame arrestor

PurdueCAT 09-06-2013 02:32 PM


Originally Posted by trex232 (Post 3989676)
how much for carb and flame arrestor

$7000.00 and i'll throw in everything else!

Not wanting to split it all up yet but I may if I can get a buyer for the runnin engine.

smiklos@sunprint 09-07-2013 07:13 AM

If you decide to split it up I could use one cam.
Steve

freekazoid 09-07-2013 07:23 AM

Pics and prices of the rockers and lifters to [email protected] thanks

FIXX 09-07-2013 10:57 AM

if your willing to part with a intake manifold i would be interested for the rite price..

freekazoid 09-07-2013 11:07 AM

Are the kb pistons for a 502 or a 454?

mikeb4130 09-11-2013 03:47 PM

manifolds good ????

PurdueCAT 09-27-2013 06:48 AM

Pistons are for a 502. Id like to keep everything together for now unless you want to make an offer I can't refuse. $6500 and you can have everything. The one engine is still in my boat if you want to hear it run.


All times are GMT -5. The time now is 12:37 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.