Would the transom have to be cut with these mounting to a bravo fountain? Transmissions will be needed for this style arneson? What will these need to be mounted and ready to run? Thanks

These use a flange mount transmission. We cannot use a plug in style as our shaft doesn't fit the transmission. We use a short coupled drive line to mate the two up.

Is the Fountain a stagger, side by side, triple to a twin or ? Size?

Its a side by side 32. So in order to fit the transmission i would have to alter the rear bench seat for having the motors moved forward. what could these style transmissions be had for? Besides the needed transmissions is everything there on the quote to make this work? Any experience with arnesons on a 32 fountain?

The transmissions are inside the box for the bravo conversion.

The engines will not go forward so your back seat is safe. Fountain put the Arnesons on the 10M & 12M at the factory back in the day. No problem..

@ $15k or best offer, I'm surprised some of you guys with bravo butts aren't jumping on this!

To the top

Do you still have these? If so Pm me
Thank You

Those went to this project.

http://www.offshoreonly.com/forums/r...ull-resto.html

What's your application?

Give me a call. 415-485-0788