The rest of my parts
 

Selling off the rest of what I have for parts I know I will miss some stuff but try to keep adding as I clean out.
Fresh 088s
Bare 088s
Boast Side harnesess
Engine Harnesses Carbed
Bravo Bells
Bravo Shift Brackets
Stern Powr Set Up
Fuel Filter Heads
2 Gen 5/6 Sea Pumps
TRS Bell Housings
26 Bravo 1 RH
28 Bravo 1 RH labbed for a twin step HP500 set up
Battery switches with cables
Billet Gen 5 Timing Cover
Roll Master chain
1 Piece push rods crane I believe
Crane gold Rockers
Solid lifters
Small Block push rods Manley
Fuel Shut Off Valve
Billet Fuel Dist. Block
Fuel Y valves
Oil filter Heads
Stock Motor Mounts
Bravo rear offshore Plate
Cam Driven water pump
Aeromotive A1000 and 1:1 fuel Reg.
Coils
Transome water pick ups
Merc Thunderbolt Dist, Coil, Module l sets 3 of them
Bravo Rams
Old School Scoops
Master trim switch set up with drives and tabs. Has trim tab pump wiring for a 34 Boat on it
3 Pin trim pump wiring harnesses
Merc Trans Fresh 0 hours
Stainless Water Pick Ups
330 Valve covers
420 finned valve covers
265 Baja switch panel
Trim switches for Tabs 2 set
Gen 4 flywheels
454 needs a refresh short block with pan dipstick
Gen 5/6 Base Pan
Steering Rams has lines and fittings not transom mounts no thru hulls
Bravo wing plate.
I will search and look around I have more but that's all I can think of.
I will get pics woring off the Ipad no pics on here
Thanks
Mike

Can tou sen me pics of coils, transom water pick ups 3 pin trim wiring harness, your switches boat side harness and engine harnesses to [email protected]

Can you send pics of billet fuel block,fuel Y valves,steering rams,and bravo wing plate to [email protected] with prices.Thanks.

Need 088 heads (716) 510-4411 Dan

Sent

How much for the heads, shipping to 77705

Cliff what ones?

pics of fuel y valves and price please [email protected]

Sent

[ATTACH=CONFIG]509448[/ATTACH][ATTACH=CONFIG]509447[/ATTACH][ATTACH=CONFIG]509446[/ATTACH][ATTACH=CONFIG]509449[/ATTACH][ATTACH=CONFIG]509450[/ATTACH][ATTACH=CONFIG]509451[/ATTACH][ATTACH=CONFIG]509452[/ATTACH][ATTACH=CONFIG]509448[/ATTACH][ATTACH=CONFIG]509447[/ATTACH][ATTACH=CONFIG]509446[/ATTACH][ATTACH=CONFIG]509449[/ATTACH][ATTACH=CONFIG]509450[/ATTACH][ATTACH=CONFIG]509451[/ATTACH][ATTACH=CONFIG]509452[/ATTACH]A few pics

How much for the gen5/6 sea water pump? What props are those? Aeromotive 1000 pump?

Still have carbed engine harness

I have a bunch of engine carb harnesses
Props are
LH 25
RH 26
RH 28 labbed
250 shipped in pump set ups

How much for the sea pump

Just saw the last post....hard to tell in pics does it come with fuel pump and is it smooth or need a rebuild

1 has pump
1 does not
Seems to spin fine. I have an impeller kit if wanted for another 25 that I'd so before using

Couple of halons
Couple 12 inch e12 subs
Cockpit umbrella
Hydraulic hatch ram
Gen 4 timing cover
540 rods ( crower) pistons ;srp ) 9.8/1

Seawater pump with small bracket. $$$??? Shipped to 10543. Chris 646.261.5554

mike ill take the single motor mount call me whenever thanks

Chris 225 to you
Ryan ill box that for you

Payment sent for sea pump

Ill ship
Tomorrow

I'm interested in the steering RAMS. Can you send picture? Also dimensions open/closed and what brand are they?

Set of mirage plus 27 L and R

Do you have the dimensions of the engine hatch actuator?

It's about 16 close 28 open

Make offers. What's not sold by end on month goes for scrap weight.
If needed I will delist what's left

Do you have a gen V/VI stock merc dispstick?

I don't believe so

ttt

Billet Gen 5 Timing Cover, still for sale, need total shipped to 17055. Thanks

Yes I still have it need the chain also?

just cover have a new chain

Make offer and can box and ship tomorrow

Aero pump
EFI 1/1 reg
Bravo trim rams 2 sets
Trs trim rams
Trs bell
Merc trans fresh with coupler plate
Perko batt switches
Master trim switches with wiring
Bravo trim pump
Gen 5/6 pan
Roll master chain
Billet gen 5 cover
Stock gen 6 timing cover
Bravo back cap
Complete gauge set for twins faria with light green bezels
Circular engine bay light new in box
461 lower end need refresh new top end with nice roller cam marine kinetics
540 rods and pistons
A few differant anchors
Old school engine scoops
Stock transome pick up
12 in alpine E12 subs new
Misc autometer gauges 2 fuel press mech gauges
New bravo shower
088 heads need refresh have 3 heads and parts to make 2 complete good heads
Michagan wheel LH 14 1/2 x 21
Mirage 25 plus LH
Exhaust tips 4 inch with trim rings no flappers
Ps pressure and return line 2 sets
Next TBolt 4 set ups
Msd tach adaptors
Stock manifolds and risers 2 sets

how much for the aero pump to 45244 ? thanks Tim

do you have any gil battery boxes

300 shipped, only an hour on pump
Sea check with smoking gun, I don't have any

Best offer