454"/330hp
 

As title says.
454/330.
Complete motor carb to pan. All accessories, and exhaust. Flywheel , bell, coupler.
Intake is scaly but functional. The rest is good looking. Block has no scales or rust.
It runs and the oil is clean. That's all I know and care to look into it.
$1200 cash and carry in s.e. Massachusetts

Thanks, mike

Can you tell me if it's a square port or oval port block? Can you see the serial number on the intake or block or heads?
If it's a square port 454/330 I am interested.

Thanks.

What year, does it run.About how many hours,salt water???? Thanks JOHN SR

Square or oval block? I thought all 330's were peanut ports???

They are

Oval, think it's a '88 but I'll verify tomorrow.
Was strictly fresh til '05 then salt/fresh thereafter. It ran in boat. Removed now. Carb off to get cleaned, gummy, sat for 2 yrs. Properly winterized for extended lay up but carb is still grimy.
500+/- hrs

Edit. Was coupled to an alpha so when I say all accessories included. That's w/O sea pump.

Nice Deal

not all 330s are peanut port, a gen 6 330 is a large oval and capable of decent hp. L29

Serial #b455123