Rest of my parts
 

Perko switch set up dual batt dual switch 130 shipped
Cam driven water pump set up 70 shipped
27 mirage plus L/R 375 shipped
25 mirage plus LH 150 shipped
SE 116 alpha gen 2 drive 10 hours 850 shipped
Gen 4 t cover 30 shipped
Mint gen 4 cover with chain and gears 80 shipped
Gen 5 cover with roll master chain 120 shipped
Master trim switch set up with harnesses 175 shipped
Fresh 990 heads with gold rockers and push rods 1300 shipped
Alpha trim ram 1 70 shipped
Bravo trim rams 150 shipped 225 for both sets shipped
Bravo shift brackets 60 shipped
Bravo coupler 160 shipped
Bravo bell 100 shipped
Faria dual engine gauge set with turquoise bezels 375 shipped included switches also
2 cup holders anod Turk 50 shipped
Gaffrig white wheel clean but not perfect 120 shipped
Blue livorsi wheel nice but not perfect 175 shipped
540 talk deck rods and pistons 9.8/1 800 shipped
Fuel filter heads 40 shipped
Oil filter heads 40 shipped no rear heads mounts sorry
SM mani risers gen 2 almost perfect complete ready to go 1800 shipped
088 heads 1 set fresh 850 shipped 1 set needs redo 450 shipped
420 merc blue covers 100 shipped
Holley pump block mount ran 10 minutes 80 shipped
TRS inner plate 100 shipped
TRS upper 250 shipped
Bravo 2 1500 shipped
Bravo gimbal 750 shipped
Bravo 1 1.36 1600 shipped
Molded OE hoses if any one is looking
Boat side cannon plug
Bravo shower 220 both CP
OE PS hoses
2 gen 5/6 sea pumps 225 shipped each or 420 both
Starter panel gauge set I pulled out of a boat 70 shipped
Trim tab switch set 40 shipped with bezel
I will get pics of anything some one needs parts are scattered between my house shop and garages

Can I get pics of the 088 heads that need redone Thanks John M. [email protected]

088 are the rectangular port g m heads?

Titan yes rec port heads sending pics to masonan

Gen 5/6 stock pan 110 shipped
Fuel Y valve blocks with fittings and 1 way flow valves 50 1 75 for 2 shipped
Fuel 4 port junction block 100 shipped
Aero A1000 pump 300 shipped
Aero EFI 1:1 reg 75 shipped
1/2 fuel filter heads 65 shipped 110 both shipped
Stock motor mounts 50 shipped pair have 4 pairs
Stock mani risers 250 plus shipping a set
Trim pump harnesses 70 each shipped have 4
T bolt dist 60 each shipped have 7
Bravo stock rear cap 40 shipped
Guess 40 amp charger 200 shipped
Radio head unit and 2 new subs 200 shipped
21 4 blades 300 shipped
2 olde style starters 120 both shipped like new
Gen 5 billet timing cover w chain 150 shipped

Pics sent thanks

Pics of the 27 Mirage + L/R.
[email protected]
Thanks

Sent

Send pics of trim tab switch set to [email protected]? Thanks.

Sent

Have you still got the bravo bell, are the bushings in good shape?

and the bravo trim rams?

Gen IV timing chain cover with gears and chain - do you know the brand of the gears and chain and how much run time on them? Thanks.

Bravo bell is in good shape bushing fine. Rams worked fine when removed
Gears are meling 4 hours run time

Can you send me pics of gauges and switches to [email protected].

Sent

Do you have the power steering bracket and rams

Do you have the power steering bracket and rams [email protected]

Ram I still have
Sold my last bracket today

Gold rockers sold
27s sold
Gen 5/6 base sold

I'll take the cam driven pump setup ...pm sent

Your box is full

I'll take the engine harness off the yellow motor...just let me know how much and I'll pickup next time I come down to the garage. Thanks Bud.

Livorsi wheel [email protected]

George you should have a harness already last time you came
Pics of wheel sent

Mike, I'm talking about the round plug harness on the engine side. The boat side is there. I believe it has either 10 prongs or maybe 14. It probably is the 10.
If I don't need the Perko switches, I'll bring them back to you to put up for sale for someone else. Let me get the snow off and I'll take a look. Thanks.

Yes I know George, motor harness but thought I gave you one. Still need the PS hoses rite?

Mike the engine harness I need has 9 prongs, 3 are large, 6 are smaller and round plug is female. It probably has the solenoid setup attached to it. I'll bring back the Perko
dual switch battery setup with wiring to you. I think it's the setup you have for sale in your listing. The boat has a Perko in it already. And yes, save the P/S set up for me. Thanks again. George

Water speedo puck up kit
Stock rocker set up and push rods gen 6
Huber 10 disk 72c low hours 1900 both trs tail stock. Rebuild was 2900

$2900 for a rebuild? the kit is only $125,00 it must have gold clutches in it for the price

Really from huber 125 ? I guess huber is over charging. And 4000 for used super chiller to a guy who can buy new for less hmmmm remember that pits or the one for lil red t housing at 100 when new is 87 ha you donkey sack

Deep breaths Mike - remember what your yoga instructor taught you. You want to stay on the board. :lolhit:

Leeeeeeeeettttttttttttsssssssssss get ready to rummmmmmmbbbbuuuuulllllllllll

Chris all good don't worry I'll be here for a while.