2 crane 651 cams
 

2 hydraulic rollers flat nose.
.632/.632 244/256 114 lsa
One was ground by cam motion to match the original crane.
Crane has 100-150 hours, the other has about 1 hour on it.
$400 for the pair plus shipping

Is that the efi cam

Ttt

If I understand this cam is basically the same as the 525 cam. But is for the gen iv or gen iv block not the gen vi is that correct

No the 741 is the similar to the 525 cam, and I found my issue and I'm able to use these. So no longer for sale