Free stuff for paying members
 

I have a couple things in my storage unit I have been tripping over off of a big block I acquired from an old Donzi. I believe in good karma and could always use a little more in my corner. I don't have any use for this stuff so if somebody here can use it, they are a paying member and active in the forums, they can have it for whatever shipping costs. I make no warranty on how good it is, but the motor did run when I got it. Don't expect lightning fast shipping, but I will get it out in a somewhat timely fashion. Also, only ask for this if you think you will use it, don't be some part hoarding dickbag, I can be that guy myself.

First: Glenwood BBC manifolds with Gil Performer risers. Did not leak water from them when running[ATTACH=CONFIG]527526[/ATTACH]

Second: Some sort of BBC cast timing cover, cam driven sea waterpump, and thermostat housing. Pumped water when I ran motor on the floor and didn't leak. Somewhere or another I have the cam spud as well, I will try to dig that up if somebody wants this, but can't promise I will find it. [ATTACH=CONFIG]527525[/ATTACH]

I'll take the timing cover and pump. Figure shipping to 44045

OK it's yours. I'll give you a shipping price when I actually get around to shipping it. PM me an address.

A day late and a dollar short, my life story. Congrats CIG3, brotherly gesture DM.

This is what the real OSO is about people helping other people!!! Some many times we here negative stuff on here good to see a positive thread!! Hats of to ya donzi matt

To be honest, Gordon gave me the idea a couple of weeks ago when he did it. Seemed like a cool thing to do.

I guess I am not all that original or altruistic. Also, when I purchased a TRS gimble off of him a couple years ago and mentioned I needed a Merc. distributor he tossed one to me and said "here ya go, just take the thing I got plenty".

He pays it forward, I pay it forward, it's all good.

I can't believe nobody is building a vintage something or other that needs some glenwood manifolds.

I will take the manifolds if still available. They will work nicely in my 74 Tahiti jet!

Let me know shipping to 03873

Thanks
Jim

502SS gets the manifolds, CIG3 gets the water pump stuff. If I come across anymore stuff I am tripping over I will add it here.

Let me know if you find any new Dart Big M blocks, or Whipples. I'll take those if they were in your way :coolcowboy:

CIG3 I haven't forgotten about you. I just found the cam spud a week or so ago. At some point I'll chuck all this stuff in a box and get it heading your way.

Manifolds are gone to my buddy Jim, hopefully they get used.

Next up, a freshwater 1987 TRS gimbal. Has some play in the lower vertical pin, but not in the tiller arm. It actually looks like the pin itself is what is worn, not the housing. Has trim rams and lines but I think one of the rams might have a minor leak (I seem to remember an oil stain on the outside of the ram). Again, no money for this to paying, contributing members, but I will need this picked up here in lovely Moultonborough NH as I am not going to ship.