Offshoreonly.com - Merlin III tall deck

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- Swap Shop (https://www.offshoreonly.com/forums/swap-shop-253/)

- - Merlin III tall deck (https://www.offshoreonly.com/forums/swap-shop/318349-merlin-iii-tall-deck.html)

88VILLAINiii

09-23-2014 06:14 PM

Merlin III tall deck

Merlin III tall deck block 4.5 bore 4.5 stroke. 1800 shipped

Btrhd

10-06-2014 09:37 AM

Hi , Could you tell me more about your block, is there a crank as well? Thanks

88VILLAINiii

10-19-2014 02:28 PM

Merliniii tall deck

Selling a Merlin iii 4.5" bore tall beck block $1200 + ride
972-two9six-1129

airjunky

10-19-2014 08:12 PM

I'll ask ,being from one of the two , where is it located ?

88VILLAINiii

10-19-2014 08:24 PM

Quote:

Originally Posted by airjunky (Post 4205769)

I'll ask ,being from one of the two , where is it located ?

Charlotte nc

88VILLAINiii

11-05-2014 06:51 PM

Ttt

88VILLAINiii

11-19-2014 10:23 AM

Still available want it gone

airjunky

11-19-2014 10:28 AM

Whoever buys it I have intake spacers and distributor slip collar for this cheap

88VILLAINiii

11-19-2014 04:23 PM

I have intake spacers and msd distributor as well,

89CONVINCORGTX

11-20-2014 09:27 PM

How many hours on it before stripped down?

88VILLAINiii

11-21-2014 06:11 AM

Quote:

Originally Posted by 89CONVINCORGTX (Post 4222694)

How many hours on it before stripped down?

Around 50hrs

89CONVINCORGTX

11-25-2014 04:26 PM

What else you got for sale or just this block

88VILLAINiii

11-26-2014 06:59 AM

Quote:

Originally Posted by 89CONVINCORGTX (Post 4225476)

What else you got for sale or just this block

It is a complete rotating Assembly 572cu contact me via 973-two9six-1129

KAAMA

11-28-2014 07:24 PM

Has the block been damaged or in need of repair?..... or does it need to be re-bored over 4.500" ? Why are you selling it?

Also, what brand of crank, rods and pistons?

Thanx

88VILLAINiii

11-29-2014 10:20 AM

Quote:

Originally Posted by KAAMA (Post 4226950)

Has the block been damaged or in need of repair?..... or does it need to be re-bored over 4.500" ? Why are you selling it?

Also, what brand of crank, rods and pistons?

Thanx

no damage no repair needed. engine was running when removed. boat is being changed to an outboard and my other boats are not tall decks so i have no use for it. i have onther listing with all the part numbers oth the internals on here. contact be direct 973-two nine six 1129. i dont have the time to check here often. thanks

88VILLAINiii

11-29-2014 10:21 AM

Scat 4340 forged 4.5" stroke crank pn-445430 $600+ride obo
Eagle 4340 h-beam 6.535" rods $300+ride obo
JE forged pistons 4.5" bore pn-257947-8 $550+ride obo

I would like to keep the rotating assembly together due to being balanced. This is an internally balanced setup.
972-two9six-1129

88VILLAINiii

11-29-2014 10:23 AM

this was a running set up before tear down NOT blown up. All parts are in good to great condition with no damage. contact me direct 973-two nine six 1129 dont have time to come on here and check

sutphen 30

11-29-2014 11:43 AM

will I get 5 yrs out of it ?using it as a mooring anchor.:party-smiley-004:

88VILLAINiii

11-29-2014 01:29 PM

Quote:

Originally Posted by sutphen 30 (Post 4227246)

will I get 5 yrs out of it ?using it as a mooring anchor.:party-smiley-004:

find one more and maybe that sutphen will finally move :party-smiley-004:

BBski

12-03-2014 05:15 PM

Just happened to be traveling thru Charlotte tomorrow and looking for a block.Have means to load into cab of tractor trailer? Not the first time I've done it.

88VILLAINiii

12-04-2014 07:53 AM

Quote:

Originally Posted by bbski (Post 4229645)

just happened to be traveling thru charlotte tomorrow and looking for a block.have means to load into cab of tractor trailer? Not the first time i've done it.

please contact me direct, check your pm or this post for my number

88VILLAINiii

12-09-2014 05:58 AM

Block is sold still have rotating assembly for sale

All times are GMT -5. The time now is 01:04 AM.