|
bmp
|
pm
|
bmp
|
Originally Posted by Team Archer
(Post 4208039)
I have 2 number II Speedmasters a RH & LH one has some problems. also have 1 Blackhawk drive with extra ratio's 1.50 & 1.36 spare upper shafts this drive is straight out of engineering at MerCruiser its a 1994 vintage drive I also have some gears and shafts for other speedmasters
|
Originally Posted by I'CE
(Post 4399473)
Dan, looking for upper gears SSM 3/4 ck. the wanted section you will find a picture of the gear that KNOT-RIGHT posted. Contact him with what you have. TY J ps: and thank you for all your input over the years!
|
Sent you a PM about the drives
|
Sorry don't have any straight cut gears but have spiral cut set for paragon shaft
|
Dan, is the set 18 x 24 tooth count? used I would assume? thanks
|
No 20 x 28 1:40 ratio and yes they are used but in good shape.
|
Dan, interesting on the straight cuts that came out it is 15x21 which equates to the same 1.4 ratio, of course the gear pitch is larger on the straight cuts. Thanks will keep you in mind for sure. PM me a $ value ok?
|
| All times are GMT -5. The time now is 02:17 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.