Complete drop in "MRD 600"
 

Complete 454 with 250 blower from skip at mrd. Was in a 40' fountain.
Don't have a lot of history on it. Hour meter reads 150 but I can not be sure that is 100%accurate.
Clean oil, clean under the valve covers. Had it running today.
Gil manifolds, 990 heads, single 4150 carb
Hyd flat tappet cam
Was used in salt water. Accessories need paint but the rest of the engine is clean.
$4000 Obo shipping available
Email for pics and video of it running
[email protected]

It is set up for trs but I can swap a bravo coupler and bellhousing on if needed. Already has a bottom mount hi torque starter.

Will sell without the blower

Good running motor for short money

Ttt

Deal pending on the blowers. Will be swapping a 177 with chiller onto this engine. Have a complete parts motor, will sell both motors, with accessories and transmissions for $6000

any word when they are coming to nj im looking at that superchiller listed for a 250

will you sell parts off of the parts engine? looking for heads

rich I will be coming thru nj next weekend to pick up the checkmate I bought

bringing your motor plates and your exhaust

I talked to lil red and poss bring blowers if you made a deal

all is good on my end

I'll sell the heads off the parts engine that need to be gone through for $300. Sorry not taking a good running motor apart for heads though.

Gordon give me a heads up on what day and we can figure out where to meet ahead of time also if u get a chance im still interested in some of the interior and maybe that rear seat unless its all rotted don't care of the corner damage and cabin cushions yes we made a deal on the blowers so hopefully u can get together with Jamie give me a call

ill get with Jamie and get everything .im thinking on leaving early sat 3;00 can either hit u up on the way down or back
ill be in touch before hand

If needed I can help

Thank you mike. If need be I'll drop them to you before you go north.

ok bringing cash

Happy to help you guys just let me know

Anyone looking for deal??

Have CMI headers available to include with motor

Blowers sold will sell with an hp 500 intake for $2500

Bump, and

Do you have another HP500 intake? I need a pair with the bronze...

Hp500 intakes did not have bronze

Explains why I can't find a pair, must have been the Dart or Merlin....thanks

PQ230 - Merlin can be had that way.

Dart made the HP500 intakes.