bravo hp gimbal assy
 

Have a bravo hp gimbal and bell housing with stainless swivel pins
this was the exact assy used to upgrade bravo drives for the blackhawk drive option
So some would call it pre-cheeze. Should fit any pre-its bravos. Good upgrade for your std bravo with worn gimbal
$ 650.00 shipped fed ex to your door

Thats too cheap for a very nice hp gimbal bellhousing and pins folks

Can you send me pics to [email protected]

Email pics sent to all .
phone replies bumped to top of pecking order its just quicker for me . Mike knows ..

This is 41646 c1 bell 8222374 gimbal. Very nice steering pin opening too.

Celebrate americas independence day with a bravo hp gimball assy made in the usa.

I am very interested and I live in Dallas. I'll send you a pm

Still up for grabs .go full hp for magnum gimbal pricing if you dare ...

Can you send pics to [email protected]. I'm in Houston. Thanks.

Just to clarify... this is a gimble ring, helmet/bellhousing, and the side pivot pins, NOT the top and bottom pins, correct????

Yep . You must be one of the ones i have sent pictures to
This is for those with a worn or damaged high performance transom needing parts or std transom wanting to upgrade. I do not have the 3 bushings that go into the gimbal and bell.
I do have a bravo transom assy avail seperatly if you wanted to build a transom off the boat then swap

I didn't ask for pics, just tryin to clarify for others. I really could use this, but I got no money!!
:)

So to clarify,
I have a standard Bravo Transom but i want an HP Transom, Can i buy your parts and transform my standard transom to a HP?
Is this a big modification?
Im a good mecanich but i never dissasembled a transom

Yes temove your gimbal and bellhousing install this.
The wildcard will be if you can reach the swivel pin nut from inside.

Can you text or email pics of what you got? 281-799-1414 or [email protected]. Thanks !

Still on the block . Needs to go to a good home .Swivel pin opening tight , with pics to verify . No this isnt a complete transom assy for 650 but it is fresh hp early cast 1997 gimbal ring and bell ,side pins no bushings or seals mint threads . Help me fund finishing my 540 build while getting a great deal on a hp gimbal upgrade kit.