2 Merlin Pro Blocks
 

2 Merlin Pro Engine Blocks with steel main caps. Bore to 4.600 (Short Deck)
These blocks are the high nickel with steel mains produced in the late 90's.
They are very strong and capable of high horsepower builds.
Asking $1,800 each or $3,000 for the pair.
PM me if interested.

ttt

Are these raised cam blocks?
What oil pan will fit these? MarkIV gen 5,6 or DRCE?
These are 9.8 deck blocks?
Lifter bore size? Are they bushed?

Thanks Bill

Also interested in the questions asked above

Not my blocks , but I can answer a few of the questions , have used that same block in the past..

They are not raised cam blocks
they take gen 4 oil pans and i believe they are drilled for drce also
they are short deck blocks(9.8) , as stated in the add, don't know exact height they could have been decked.
they appear to be standard size lifter bores, they are not bushed as per pictures.

hope this helps u guys..

Thanks TomFTM you have it right ! Check with WORLD PRODUCTS or PM me

what bore size are they at present?

1st line says 4.600 current bore