Stainless marine long risers x 2
 

I have two stainless marine long riser kits. One manifold on each kit has been drilled and tapped for an O2 sensor. The risers have a bung welded in them if you wanted to run them semi dry and dump some water overboard. They are in decent shape, the risers have been pressure tested. Just came off perfect running engines. New boat is stagger. Have all mounting hardware and the jumper hoses that connect the manifold to the riser. $2500 for it all.

The orange rtv comes right off.

would you separate?

Not yet.

Bump

2300

One set sold. 1100 for the remaining set.

Did you run transmissions in your boat? Or bravo setup? I'm just curious if these risers/tails have a bravo bend angle or the trs riser bend? Thanks.

Bravo setup

Any chance you would sell just a pair of tails?

Pm sent. Open to offers

I am having my Stainless risers converted to be like these in Conroe, Tx by Brad at The Prop Shop 713-269-4266

Glenamy, that's ironic, I have a set at brads too getting the same thing done.

That is what Brad said when I called and ask his permission to post his name & number. I'll be at Brads tomorrow, interested to take a look at what he is doing to yours.

Both sets sold.