LH+RH 28p Bravo I 4-blade props, lab finished by B-Blades - LIKE NEW! TESTED ONCE!
#11
Registered
Thread Starter
iTrader: (1)
Join Date: Sep 2005
Location: West Michigan
Posts: 252
Likes: 0
Received 0 Likes
on
0 Posts
I don't have up to date dyno numbers, but I tested them with twin na engines that were probably around 680hp, turning them with 1.5 ratio full scx drives at 6000-6100 rpm.
#14
Registered
Thread Starter
iTrader: (1)
Join Date: Sep 2005
Location: West Michigan
Posts: 252
Likes: 0
Received 0 Likes
on
0 Posts
I changed gear ratio between running them stock and labbed (1.34 to 1.50), so I don't have a one for one comparison. I did ask B-Blades to keep them as close to stock RPM as possible... I also emphasized balance and leaving plenty of blade thickness to ensure they would last.