![]() |
Complete imco sc -3 drive
I have a complete IMCO SC -3 Drive for sale. Upper has 10 hours on it. Lower has 30 hours on it. 1 1/4 prop shaft. 1.50 gear ratio. $8000 OBO. Matt 9287134005. [email protected]. Drive is in AZ.
|
Text or email for pictures. Thanks.
|
Make an offer!
|
is that a direct Bravo 1 bolt on?
|
I'm in need of a 3" upper. Would you separate and how much for just the upper?
|
Originally Posted by class6
(Post 4381649)
is that a direct Bravo 1 bolt on?
|
Originally Posted by 1980 Martini
(Post 4381723)
I'm in need of a 3" upper. Would you separate and how much for just the upper?
|
1 Attachment(s)
That is a good price for the hours. I think this is a 15K drive new shipped. The SC upper is made differently when you buy it with -3 lower. The stock SC upper I think you can not run a -3 lower on it without modification. Yes it bolted right up to my B1 gimbal. The SCX needs a modified B1 or an SCX gimbal the bolt pattern is different.
I have one on my boat. Love it, got me 6+MPH with the same BBlades 30P prop but I am now at 5600 and need to get my 32P done by Bblades. This is what he is selling, see the cavitation plate, this complete SC Xtreme Advantage (NOT SCX just SC) drive was purchased from IMCO with a -3 SC lower. [ATTACH=CONFIG]548247[/ATTACH] IMHO 8K is a good deal on this very low hour drive and it is in the USA as well. |
Originally Posted by Baja170
(Post 4381886)
That is a good price for the hours. I think this is a 15K drive new shipped. The SC upper is made differently when you buy it with -3 lower. The stock SC upper I think you can not run a -3 lower on it without modification. Yes it bolted right up to my B1 gimbal. The SCX needs a modified B1 or an SCX gimbal the bolt pattern is different.
I have one on my boat. Love it, got me 6+MPH with the same BBlades 30P prop but I am now at 5600 and need to get my 32P done by Bblades. This is what he is selling, see the cavitation plate, this complete SC Xtreme Advantage (NOT SCX just SC) drive was purchased from IMCO with a -3 SC lower. [ATTACH=CONFIG]548247[/ATTACH] IMHO 8K is a good deal on this very low hour drive and it is in the USA as well. You cannot run a -3 lower on a standard upper. You can see the step in the cavitation plate that will allow you to run a -3 lower. Thanks for the picture. This is a IMCO upper made just for the -3 lower. |
Originally Posted by mattb
(Post 4381891)
Exactly! Thank you.
You cannot run a -3 lower on a standard upper. You can see the step in the cavitation plate that will allow you to run a -3 lower. Thanks for the picture. This is a IMCO upper made just for the -3 lower. |
| All times are GMT -5. The time now is 06:03 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.