Swim platform and cabin door
 

I was going to use the platform on my rig but it is not wide enough. It is roughly 62" from the center of the mounts. I was told that it is stainless not alluminum. Does not appear to have been mounted. Some chips/scratches from storage but a nice piece. Is $800 plus the ride fair? The cabin door is very nice, will get measurements upon request. One corner has a slight bend (easy fix) and the frame has a slight bow that appears like it will correct it self when installed. I don't what particular particular boat it came from. A friend of mine manufactured boats for 40 years and this was something he had laying around that he thought I could use. Does not work for me. He said his cost to have these made was $700 many years ago. What's it worth? [ATTACH=CONFIG]547880[/ATTACH][ATTACH=CONFIG]547881[/ATTACH][ATTACH=CONFIG]547882[/ATTACH][ATTACH=CONFIG]547883[/ATTACH][ATTACH=CONFIG]547884[/ATTACH][ATTACH=CONFIG]547885[/ATTACH]

Would trade for a Herring prop for Bravo xr . Not run the boat yet but 28ft single power 625hp/730 lbft so something compatible.

What are the dimensions on that cabin door?

I have 2 hydromotive q4 props 27 pitch r/l.
They cost me 1600.00
I need a swim platform for my sonic. Ill measure my transom tomorrow.

I will get dimensions sometime today.

Cabin door
 

Cabin door measures 24" wide X 38" tall

I will double check the measurements on my boat this afternoon but I think I can make that work. How much do you want for it?

Is $350 reasonable?

Cabin door sold. Thank you OSO