575 sci superchargers
 

I have 2 575 superchargers I bought for a project that never came together. Both are from running engines and are complete with tensioners pulleys and belts. I have 3.5 and 4" pulleys. I have good intakes with them. would like to sell all together but pm me with what you need. 1600 each with intake, 3000 for pair + shipping.
Scott

[ATTACH=CONFIG]548310[/ATTACH][ATTACH=CONFIG]548309[/ATTACH][ATTACH=CONFIG]548308[/ATTACH][ATTACH=CONFIG]548307[/ATTACH][ATTACH=CONFIG]548306[/ATTACH][ATTACH=CONFIG]548305[/ATTACH][ATTACH=CONFIG]548311[/ATTACH][ATTACH=CONFIG]548312[/ATTACH][ATTACH=CONFIG]548304[/ATTACH]

Re 575 Blowers
 

Could you E Mail Pics of the intakes I am interested in the pair Thanks

Are these 177's or 250's and I presume the intakes are 9.8 ?........how many hours are on these......Id like pics of the intakes also, can you post them ??

sent u a pm with my email

thanks 79

I think they are 256.

The 575SCi uses Weiand 256 blowers. That seems like a very good price for them.

I will get pics of the intakes. They are in real good shape. The blowers are 256s and are in good shape. I bought them from another member here and never used them. We bought a new boat. The previous owner stated that one blower was refreshed and had 1 poker run on it. The other had 1 season on it. I forget which was which. One has teflon strips and the other does not. The rotors look great and they turn smoothly. Thanks Griff I have them priced to sell, i got some bad news from eddie young on my 525efi he has. Text or call me 615-948-4646
Scott

One is a weiand 256. The other is a B&M 250.
Mercury started out with the 256 and switched over to the 250.

Both have a W cast in the housing. I was not aware that b&m bought castings from weiand.

I presume the intakes are rectangular port?

Yes they are rectangular port

He is correct. And Holley/Weiand bought b&m so that's why the W is on the 250.

But anyway they are pretty close but 2 different blowers. Still a good price though!!

Thanks for the info. I was not sure of the time line when holley was buying everything in sight.

Ttt

[ATTACH=CONFIG]548586[/ATTACH][ATTACH=CONFIG]548587[/ATTACH][ATTACH=CONFIG]548588[/ATTACH][ATTACH=CONFIG]548589[/ATTACH]
These are in very serviceable condition as is or very easy weld and grind to bring back to 100%

do you have the thermostat housings?

No. Only have what is pictured. Blowers, intakes, lower pulleys, 2 sets of upper pulleys (3.5" and 4") and the belts. Im pretty sure thats all.

interested in the small pulley's

They are both Weiand 256 blowers, one is a Mercruiser hard anodized case and Weiand machined off, the other is a newer case but has the Mercruiser drive on it, I would say someone lost one blower and purchased a new blower section at one time. Good luck with the sale.

Still for sale! Lots of interest in the intakes. If you are looking for a spare blower pm me Im sure the intakes and pulley setups will sell.

Weird, looks like the rear bearing covers are mismatched. Like they should be swapped around to match the front covers on each blower. They are 256 Weiands, one being a Merc blower (anodized case) other looks to be a non merc blower.

I see one is teflon stripped, is the other one also? I don't believe the 256's were teflon stripped either from merc, or from Weiand. The 250's were, both from B&M, and Weiand (weiand/holley did take over B&M).

Standard procedure ti strip them at rebuild time. DMPE stripped mine when I sent it in for rebuild. gained about 1/2lb boost

One is stripped. It has 1 season on it. The other is fresh with 1 poker run on it. Ready to run

Bump

Christmas bump

Still avail? Pm me if so. Thx

Scott, I've replied to your email

Still for sale. No international shipping please

Very interested but i'am from Puerto Rico.

Pm sent

Deal pending. Thanks for the intrest

Sold!!! Enjoy them Heath