BBC Parts
 

Hello,

I'm cleaning up the garage and I have some bits and pieces I want to move out; all prices are in USD plus shipping from 14305 and open to offers. I will be shipping whatever sells on Feb 13 from Buffalo to help keep the shipping costs low.

ALL PARTS ARE FRESH WATER


Stock oil / PS combo cooler from mark 4 454 MAG, removed from my motor when converted to MPI, complete with block adapter and remote mount.
$150
https://lh3.googleusercontent.com/b0...z=w708-h943-no

https://lh3.googleusercontent.com/T6...S=w956-h717-no

Stock oil / PS combo cooler from mark 4 454 MAG complete with remote mount, I may have a block adapter but I'm not sure about hoses, I'll include anything I can find.
$100
https://lh3.googleusercontent.com/fc...N=w956-h717-no

https://lh3.googleusercontent.com/dl...9=w956-h717-no

https://lh3.googleusercontent.com/gy...H=w956-h717-no

BBC Power Steering cooler, not sure what it's off but it's a full size cooler. The ends are a little banged up but can be easily straightened.
$50
https://lh3.googleusercontent.com/gz...c=w956-h717-no

https://lh3.googleusercontent.com/0k...N=w708-h943-no

Stock wiring harness from mark 4 454 MAG, removed from my motor when converted to MPI NO WIRES CUT!
$100
https://lh3.googleusercontent.com/Q3...A=w956-h717-no



Stock distributor with coil & Thunderbolt IV module including harness as shown from a mark 4 454 MAG, removed from my motor when converted to MPI NO WIRES CUT!
$125
https://lh3.googleusercontent.com/Gi...P=w956-h717-no

https://lh3.googleusercontent.com/T9...S=w956-h717-no

Stock fuel pump, hard lines & filter head from a mark 4 454 MAG
$40
https://lh3.googleusercontent.com/9l...I=w956-h717-no

Bellhousings - 1 large coupling bravo style from a EFI Alpha setup & 1 small coupling of an unknown setup
$100 Each

Large
https://lh3.googleusercontent.com/WF...l=w956-h717-no

https://lh3.googleusercontent.com/Fk...S=w956-h717-no

Small
https://lh3.googleusercontent.com/XH...M=w956-h717-no

https://lh3.googleusercontent.com/hd...w=w956-h717-no


Feel free to call or text if you have any questions.

Ken
(647) 889-2211

Ken-

I need the stock carb linkage hardware if you have it. I'm talking about the bracket that mounts to the carb base and the adaptor that screws to the cable. Do you have these parts?

I have the bracket with return spring; are you asking for the plastic cylinder that clamps the cable to the bracket or the cable end that attaches to the carb linkage? Send me your email or number and I'll send you a pic of what I have.

Mailing out parts tomorrow, make an offer and help me free up some space!

Bravo housing sold.

Bump

P.M sent ..I'll take the thunderbolt IV stuff

$20 to ship the distributor, PM sent.

Harness tentatively sold, distributor and module still available.

Harness & distributor are sold.