Gen IV BBC HR Camshaft
 

CompCams Gen IV BBC billet camshaft with cast timing gear. Comes with matched CompCams springs. 140 hours. 255/263 @ .050, .632/.632 lift, 114 LSA. $350 plus shipping.
[ATTACH=CONFIG]555925[/ATTACH]
[ATTACH=CONFIG]555924[/ATTACH]

I have a few questions if you don't mind. I'm looking for cams for 555 builds. What cubic inch engines did this come out of? If you don't mind sharing how it performed etc. Also is it an aggressive lobe with any lifter concerns?
Tks
John

These were in a 598" engine with 10:1 compression. They cam performed well and it's easy on valvetrain. I would image it would be a good healthy cam for a 555".

Has 7/4 swap. 1/8/7/3/6/5/4/2 firing order.

Ttt

Bump

Nice Cam it should sell quickly

Haven't done the 7/4 swap build yet. Being sometime now since being introduced any solid insight?

If you have any vid clips of engine running with that cam please send to 231233151three
Tks
John
Very close in what I'm looking for.

Here ya go. It's the 28' Pantera passing on the Port side. https://youtu.be/oOy0AvKSB6k