Tow/truck/trailer wiring
7 Attachment(s)
Two separate items, sold as a lot. I bought these to get a setup working on my GF's SUV, and did not end up needing them.
New-Pollak-7-Way-Pole-Trailer-Connector-Plug-Pin-in-Center New Pollak 11-898 RV 7 way OEM Socket & Wiring Kit With Bracket 4' long, this is for the truck side of your setup, ideal to replace broken trailer wiring, OR to relocated your hitch wiring connector into the rear bumper beside the license plate like most folks do when upgrading hitch. You may not even need the wiring pigtail to do this. [ATTACH=CONFIG]556982[/ATTACH] [ATTACH=CONFIG]556983[/ATTACH] [ATTACH=CONFIG]556984[/ATTACH] [ATTACH=CONFIG]556985[/ATTACH] [ATTACH=CONFIG]556986[/ATTACH] [ATTACH=CONFIG]556987[/ATTACH] [ATTACH=CONFIG]556988[/ATTACH] $40 shipped using USPS flat rate box |
1 Attachment(s)
This is how you can mount the female side in the rear bumper of your truck. This is on a 2500HD GM, whereas the original trailer hitch wiring location is low, weak, and vulnerable.
You can also use all this for a 5th wheel or gooseneck extension if needed. [ATTACH=CONFIG]557004[/ATTACH] |
Make offer.
|
bump
|
All times are GMT -5. The time now is 04:46 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.