Stelling tails , 5 of them ,,,
 

Bought these for a project but something came up and need cash quick..

Tails for Stellings or similiar..
Have 5 tails for Stelling headers or any header using the twin side bolt method of attaching. They are 4" dry exhaust,,of course you can cut ends off letting water mix at that point and make them mix at that point. Gives you advantage of dry tails but with water mixing right before they dump.I have my boat set that way.

Straight 7ft long pipe,,,has leak at weld at very end where exhaust exits.
This would not affect anything and easily sealed if you wanted to . $75

Angled 6.5ft pipe , for staggered setup,,leaking at bend in pipe, pinhole leak,,pipe wuld need to be cut around leak and rewelded
$75

Straight 3ft 8" , no leaks,,tested good $100

Straight 4ft 2" , no leaks ,tested good. $100

Straight 3ft 5" , leaks t each end ,needs repair $50
Best way to get ahold of me is email,not posts and not PM, if you post here and someone else emails me they will have priority as I dont spend my entire day checking this place out or checking my PMs however I do check my email at least once every hour. [email protected]

PRICES DO NOT INCLUDE SHIPPING..
I prefer that you pay me for part,,I box it up for you for free and I drop it off
at UPS here in Lago Vista and you pay them directly for shipping..
This ensures
1.That you pay exactly what shipping is and I dont make any money off it.
2.If there is an insurance claim you get paid since you paid for the shipping
Phone for ups in Lago (512) 267-2924

PICS at
https://www.facebook.com/media/set/?...1&l=45740ef37c

bump for a Honest seller, 540 is done and in the boat, thanks for the quick ship!

Wow,,that was a quick build! Enjoy ,,glad someone is getting use of that monster.. :-)

The
Straight 3ft 8" , no leaks,,tested good $100

Straight 4ft 2" , no leaks ,tested good. $100
ARE SOLD!

ttt

new prices..
Straight 7ft long pipe,,,has leak at weld at very end where exhaust exits.
This would not affect anything and easily sealed if you wanted to . $70

Angled 6.5ft pipe , for staggered setup,,leaking at bend in pipe, pinhole leak,,pipe wuld need to be cut around leak and rewelded
$65

Straight 3ft 5" , leaks at each end ,needs repair $40

Thanks for shipping them out so fast, they look great!

Glad you can use them.

How many of these tail pipes are still available

I spoke with someone on phone last week that was interested in tailpipes,,unfortunately lost all your info,,please contact me again,,
[email protected]