CMI E-tops and bare Dart Pro 1 BBC heads
12-11-2016, 07:14 AM
#1
Registered
Thread Starter
CMI E-tops and bare Dart Pro 1 BBC heads
I have two pairs of CMI E-tops with the factory welded distribution tube. These are the flat gasket style, not the rope style seal. Cosmetically they are good, one pair had some corrosion on the sealing flange but not anything to prevent sealing. Make offer.
Also have two pairs of Dart Pro1 BBC heads. These are just bare castings. My engine builder told me they had gotten a bit corroded in the coolant passages and I decided to just change heads. He was welding up the area around the coolant passages and was going to machine back flat. So these do need a bit of work. Painted Mercury blue. Make offer.
Also have two pairs of Dart Pro1 BBC heads. These are just bare castings. My engine builder told me they had gotten a bit corroded in the coolant passages and I decided to just change heads. He was welding up the area around the coolant passages and was going to machine back flat. So these do need a bit of work. Painted Mercury blue. Make offer.
