Zul Blower engine - Supercharged and Intercooled just built Spring 2016
01-09-2017, 02:41 PM
#1
Registered
Thread Starter
Join Date: Jan 2006
Location: LI, NY
Posts: 175
Likes: 0
Received 0 Likes
on
0 Posts
Zul Blower engine - Supercharged and Intercooled just built Spring 2016
Richie Zul Blower / Intercooled Motor 840hp 810 tq - 9 months old with less than 3 months/20 hours useage.
Yes, Richie himself built this just recently.
I have an array of dyno videos, build pictures, and dyno sheets for serious buyers. Motor was just built Spring 2016 and used for about 10 outtings from August to October.
Totally Rebuilt Megablower with 3 lobe helix rotors - all receipts available.
Teague Superchiller
Pair of Holley 750 carbs
All pullies and idler, plus extra pullies and belts
Dart Pro 1 aluminum 325 heads - all fresh and redone for cam
4" Stroke. 4.530 Bore with JE pistons
Carrillo Rods 6.385
Zul spec Solid Roller lifters/cam setup
Crane Golds
Billet timing set
Gil 10 quart oil pan
SS Crossover
Teague Valve Covers with breathers
Billet MSD
Daytona ignition system with Map sensor for 3D timing with data logging
Wiring harness and all sensors.
I won't cry the story.... Lots of money invested. I'm looking for $15,000.
PM or text with "serious" inquiries please. 516-817-1903
Steve
Yes, Richie himself built this just recently.
I have an array of dyno videos, build pictures, and dyno sheets for serious buyers. Motor was just built Spring 2016 and used for about 10 outtings from August to October.
Totally Rebuilt Megablower with 3 lobe helix rotors - all receipts available.
Teague Superchiller
Pair of Holley 750 carbs
All pullies and idler, plus extra pullies and belts
Dart Pro 1 aluminum 325 heads - all fresh and redone for cam
4" Stroke. 4.530 Bore with JE pistons
Carrillo Rods 6.385
Zul spec Solid Roller lifters/cam setup
Crane Golds
Billet timing set
Gil 10 quart oil pan
SS Crossover
Teague Valve Covers with breathers
Billet MSD
Daytona ignition system with Map sensor for 3D timing with data logging
Wiring harness and all sensors.
I won't cry the story.... Lots of money invested. I'm looking for $15,000.
PM or text with "serious" inquiries please. 516-817-1903
Steve
Last edited by Shibby1485; 01-09-2017 at 04:24 PM. Reason: Phone number
Platinum Member
