Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Swap Shop (https://www.offshoreonly.com/forums/swap-shop-253/)
-   -   SSM III or IV 19 spline props (https://www.offshoreonly.com/forums/swap-shop/345313-ssm-iii-iv-19-spline-props.html)

Cig41 03-11-2017 06:32 AM

SSM III or IV 19 spline props
 
2 Attachment(s)
Great condition. No repairs, no damage. 16.5" x 28p $1000.00 shipped 48 state, for the pair. PM or call 909.322.8657

Cig41 03-11-2017 08:20 PM

So I've looked through several past posts for similar props, I honestly think I'm high on the price. I am changing to $800 shipped for pair. By the way, these are the long hub style.
Thanks

Cig41 03-15-2017 09:20 AM

1 Attachment(s)
[ATTACH=CONFIG]565602[/ATTACH]Here's a pic of hub dimension. From what I have gathered from forum info, this full length hub is a better choice than short hub with spacer....

getrdunn 03-15-2017 08:47 PM

Do you mind sharing what you were running for power, rpm and boat? I'm trying to figure out what I'm going to need in a 12 meter with a pair of 900-950's

Tks
John

Cig41 03-15-2017 09:56 PM


Originally Posted by getrdunn (Post 4537878)
Do you mind sharing what you were running for power, rpm and boat? I'm trying to figure out what I'm going to need in a 12 meter with a pair of 900-950's

Tks
John

I never used these on my Cig. After I purchased I ended up with different gear ratio and could not use. I purchased from 'EightSecv6'. He had them on a 35 Mistress N/A. You could search his post from late last year. Hope this helps!
Thanks, David

Unlimited jd 03-15-2017 10:19 PM


Originally Posted by getrdunn (Post 4537878)
Do you mind sharing what you were running for power, rpm and boat? I'm trying to figure out what I'm going to need in a 12 meter with a pair of 900-950's

Tks
John

I believe member chefke said in one of my threads he had a 12 meter with 850-900 hp years back

Unlimited jd 03-15-2017 10:21 PM

http://www.offshoreonly.com/forums/g...gravity-5.html
Post 48

Sorry for the hijack, at least it's keeping your add at the top

Cig41 03-18-2017 08:25 PM

Bump

Cig41 03-25-2017 12:09 PM

Bump

scippy 03-28-2017 06:22 PM

I only have one pair of 18"X26p props (long hub)........ wonder how these would work?

Cig41 03-28-2017 06:43 PM


Originally Posted by scippy (Post 4541631)
I only have one pair of 18"X26p props (long hub)........ wonder how these would work?

They say 1" of diameter is about 2" of pitch. I know the bigger the diameter, the more stern lift. The smaller diameter should carry bow more, and keep stern a little more planted.

Cig41 03-29-2017 09:08 PM


Originally Posted by Cig41 (Post 4541641)
They say 1" of diameter is about 2" of pitch. I know the bigger the diameter, the more stern lift. The smaller diameter should carry bow more, and keep stern a little more planted.

Maybe someone can chime in on their thoughts for comparing your props to these. I curious if my thoughts are close!

scippy 03-29-2017 10:32 PM


Originally Posted by Cig41 (Post 4541983)
Maybe someone can chime in on their thoughts for comparing your props to these. I curious if my thoughts are close!

I'd be interested to know as well

Cig41 04-04-2017 10:01 PM


Originally Posted by scippy (Post 4541631)
I only have one pair of 18"X26p props (long hub)........ wonder how these would work?

Did you look into this anymore? There's a prop forum here that maybe can help.
Thanks

scippy 04-04-2017 11:04 PM


Originally Posted by Cig41 (Post 4543783)
Did you look into this anymore? There's a prop forum here that maybe can help.
Thanks

No, been sidelined with so much & haven't researched it yet.....Frankly, I'm adressing maintenance $$$ issues now and props will have to wait for the time being......thanks, Scippy

38vice 04-06-2017 03:17 PM

Hey David check your messages.

Cig41 04-07-2017 10:30 AM


Originally Posted by 38vice (Post 4544222)
Hey David check your messages.

38vice, I don't see anything in my PM....?
Thanks

I'CE 04-08-2017 12:18 AM

who has old school 19 spline L&R 4 blade, long hub 16.5/17.5 X 29-31 pitch , .. itch in to get spun... TY jjbgd must be perfect .. lol

Cig41 04-08-2017 01:27 AM


Originally Posted by I'CE (Post 4544566)
who has old school 19 spline L&R 4 blade, long hub 16.5/17.5 X 29-31 pitch , .. itch in to get spun... TY jjbgd must be perfect .. lol

I've been hi jacked, not even with a sorry! Can anyone help this poor soul?

38vice 04-08-2017 10:04 AM

I will send you another. Let me know if you get it. Thanks

Cig41 04-18-2017 03:10 PM


Originally Posted by 38vice (Post 4544622)
I will send you another. Let me know if you get it. Thanks

Please check your pm.
Thanks


All times are GMT -5. The time now is 12:40 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.