Full Force

iTrader: (5)

Picked up a boat but using my own power so I am selling what's in it, all work done in 2012 and has approx 60 hours on them, I will list the parts I have paperwork for or what is seen visually... engines can be ran and possibly water tested if I have a serious buyer, they will remain in boat for 2 more weeks, they come out after 10/29

555 cubic inch, Merlin tall deck blocks, Callie's crank, Carrillo rods with arp2000 bolts, JE pistons, 8.5:1 compression, Brodix heads I believe are BB2 Cnc, cams are 234/242 .610/.632 lift Manley pushrods, crane gold rockers, edelbrock 4500 454r intakes, 1050 dominators and flame arrestors, will come fully dressed with accessories, wiring, msd distributors, wires, fuel pumps are carter or baker not sure, sea water pumps, alternators, flywheels, no bell housing or oil cooler system I will connect lines together in place of cooler as I am using them, no exhaust that can be bought seperate. Dynoed at 622 hp and 648tq I will provide all the paperwork I have for them
Pushed 38 top gun with konrads and 28 bravo1 to 75.8 mph. As is no warranty cash only, I can pull once I have deposit, cash only for remainder no checks, deposit can be PayPal if needed.
20,000.00 for both picked up 44138