Cleaning out the garage
 

I have the following brand new never installed parts for sale.

Hi Torque IMI Perf top mount starter. $300

Livorsi 3 3/8" GPS 100 mph recall Speedo kit $400

(1) USED Mercury trim pump (my spare) $200

(3) Hardin white face water pressure gauge kit. $45 each. (sale pending)

(3) Dual SS water discharge 3/4 NPT fittings. $80 each.

Moroso 0-15 PSI Fuel pressure gauge with fittings. $40

(6) Hardin adjustable water pressure relief valves. 7-25 PSI 3/4 NPT. $75 each. (sale pending on two)

(1) Mercury Racing HP 465 Flame arrestor USED. $50 (sale pending)

(3) 5/16" o-ringed black anodized flame arrestor hold down nuts. $15 all. (sale pending)

(12) Champion Copper Marine QL77PP spark plugs. These were for my Merc 250/300x outboard. NEW. $50 all.

STAINLESS FITTINGS: Bought these to plumb sea strainers.

(12) Straight 1" NPT to 1 1/4" hose. $15 each. (sale pending)

(6) 90 degree 1" NPT to 1 1/4" hose. $25 each.

(10) 1" NPT stainless nipples. $10 each.

(5) 3/4" NPT stainless plugs. $10 each.

(3) 1" NPT brass shut offs. $20 each. (sale pending)

(3) 3/4" NPT brass shut offs. $15 each.
Attachment 571569Attachment 571570
Attachment 571571
Attachment 571572Attachment 571573
Attachment 571574
Attachment 571575Attachment 571576
Attachment 571577
Attachment 571578Attachment 571579
Attachment 571580
Attachment 571581
Attachment 571582
Attachment 571583Attachment 571584
Attachment 571585Attachment 571635

Relief valves
 

I'll take the two relief valves.
Thank you,
David

Trim pump pics?

Asking for this list of parts below and what price shipped ? Hopefully a bit easier on you, one buying a group of stuff rather than one part at a time. Asking if possible price break and if so I will take the complete list of the parts I listed below. Thank you for your time. You can PM me or how ever. .

All 3 Hardin white face water pressure gauge kits $ 45 each

All 3 Black flame arrestor nuts - $ 15 for all

All 3 - 1 " NPT shut off valves $ 20 each

All 12 Straight fittings !" NPT 1 1/4 hose $ 15 each

1 - 465 flame arrestor $ 50

On the GPS Speedo 3-3/8's or 4-5/8's cutouts?

I will post some this morning.

3 3/8's

I'll take the arrestor

Posted

How can we pay?

The arrestor was already spoken for above. If he backs out or payment isn't received in the next few days it's yours.

Ok sounds good
thsnk you

Thanks PM sent to you

Bump

Why can't I edit my original post?

Did you get my check yet ? Thanks

Yes. Just got it Friday. Thanks!

Water pressure relief valves
 

Did you get my check for the two valves?
Thanks,
David

Yes, I am shipping them out in the morning and I tossed in an extra one for all of your *****ing.

I have the following brand new never installed parts for sale along with some used stuff.

Hi Torque IMI Perf top mount starter. $300

Livorsi 3 3/8" GPS 100 mph recall Speedo kit $400

1 set of Gil dry tailpipes. These were originally from a TRS/SSM boat as they were really long. I cut about 18" off them to make new tailpipes for my Fountain. Sold the other set. These are now 40" long and sitting flat on the floor they are about 9-9 1/2" to their highest point. Couple little dings. $200 plus shipping. Shipping isn't cheap as it's a BIG heavy box.

(1) USED Mercury trim pump (my spare) $200

(3) Dual SS water discharge 3/4 NPT fittings. $80 each.

Moroso 0-15 PSI Fuel pressure gauge with fittings. $40

(3) Hardin adjustable water pressure relief valves. 7-25 PSI 3/4 NPT. $75 each.

(12) Champion Copper Marine QL77PP spark plugs. These were for my Merc 250/300x outboard. NEW. $50 all.

STAINLESS FITTINGS: Bought these to plumb sea strainers.

(6) 90 degree 1" NPT to 1 1/4" hose. $25 each.

(10) 1" NPT stainless nipples. $10 each.

(5) 3/4" NPT stainless plugs. $10 each.

(3) 3/4" NPT brass shut offs. $15 each.

I'll take the spark plugs
Pm sent

You firm on the starter price