SSM #4 drives and Gimbals/transom assemblies
 

$10, 000
1. 50 ratio .Always fresh water .Both drives gone thru at Collabellas in 2013, new lower gears and polyshaft , RH gone thru lower and brand new prop shaft in 2017 @ Speedmaster inc. No leaks, oil clean, no issues, no salt junk. Gimbal assemblies in great shape.
LH has 26 spline big shaft RH has a 19 spline new shaft ( I use the 26 spline Arneson adapter)

Will sell a set or 17.5x33 props for $1500 with drives.

http://33outlaw.zenfolio.com/img/s/v...06710913-4.jpg

^^^^ This receipt does not include shaft and new lower gears which came from different vendor


http://33outlaw.zenfolio.com/img/s/v...06710908-4.jpg


http://33outlaw.zenfolio.com/img/s/v...06710911-4.jpg


http://33outlaw.zenfolio.com/img/s/v...06710930-4.jpg

http://33outlaw.zenfolio.com/img/s/v...06710986-4.jpg



http://33outlaw.zenfolio.com/img/s/v...06711038-4.jpg


http://33outlaw.zenfolio.com/img/s/v...06711211-4.jpg

http://33outlaw.zenfolio.com/img/s/v...06710909-4.jpg





Perfect for a TRS conversion...

Awesome deal. Wish I wasn't going into my off season. Damm...

any chance of selling just the right hand drive.

Whats are you putting back on ??

Speed racer , 5`s .
scarab Not separating unless you have someone else who wants everything but a RH drive

any one out there interested in splitting the set.

What drives are you putting on the boat?

See post #5

Spacers included? And with the shaft adapter does the prop get moved back much?

Class 6 the adapter does not move the prop at all . RG.

I`m keeping the Spacers .
With the Arneson adapter the prop does get moved back a little bit .

How much power is in front of the drives and what kind of speed can you get ?

Drives
 

what all is included with your drives? Tie bar? Transom housings? What’s your bottom dollar picked up?

Drives
 

Still available?

props
 

Hai, Do you stille have the pair speedmaster props. And wil you sell the props
Best Regards Ed

Props are sold. drives will be available after the temps gets above 60* .. so a few months .

You mentioned that these would be a good solution to swapping out with old TRS drives . Would this require transom work?

Text me your bottom dollar on your drives. I won’t need them until spring and will pick up with cash in hand. I need both drives plus transom assemblies. Thanks. 816-261-5575

Call or Tex me if the drive are still for sale
 

I have a pair of #3s that are ready for a rebuild and I need a gear ratio change. May be better off with your #4s. I know they are shorter and thats good. My prop shafts are 3 inches below running surface. Can have picked up / Alex 410 570 8250

#4
 

do you sill have the number #4s
Regards Ed

I still have the IV`s . One is at collabellas getting new gears.. $10k for drives/spacers only . I do know of some transom assemblies if needed. Props are gone.



Edit:
RH drive will have new upper (straight cut forged) and lower gears.


Transom assemblies :
These are available (painted purple) $3500 fresh water since new:






https://cimg6.ibsrv.net/gimg/www.off...3fb359e76a.jpg





Fresh Huber 1200 plug in with cryptonite shaft also available

speed master#4
 

What is the ratio in the upper and lower

Ed

Drives are 1.48 ratio.

speed master
 

oke 1, 31 in the upper drive housing and in the lower 1, 25

speed master 4
 

What are the ratio off the upper housing from your number 4s
and are the big shafts in the lowers

As the description says :

Not sure on the upper ratio but I can ask. lower is 1.25

Can you send my pictures from the drives, to my mail address

email ... [email protected]

Regards Ed

Sent

Would you sell the prop adapter 19 to 26

Interested in the whole set. Can you email me pictures and a phone number to [email protected]?

thanks

No sorry,

I have a LH drive left , big shaft #4

$2500

Was just looking for prop adapter. Thanks