540ci/ 625HP Carb Motor/ Fresh Rebuild
01-17-2018, 01:30 PM
#1
Registered
Thread Starter
540ci/ 625HP Carb Motor/ Fresh Rebuild
Originally built by Ron Sprol Performance
Scat Crank shaft, Oliver I beam rods, Roller Rockers, Canfield Aluminum Heads, 12qt oil pan, Merlin Intake and 1 inch carb spacer.
Includes bell housing, Flywheel and HP Bravo Coupler
100% Fresh Professional Rebuild, Ready to Dress and Install
Comes as shown in pictures
$6200 plus shipping
Photos and more info in link: https://fortmyers.craigslist.org/lee...463124705.html
239-443-8233
Scat Crank shaft, Oliver I beam rods, Roller Rockers, Canfield Aluminum Heads, 12qt oil pan, Merlin Intake and 1 inch carb spacer.
Includes bell housing, Flywheel and HP Bravo Coupler
100% Fresh Professional Rebuild, Ready to Dress and Install
Comes as shown in pictures
$6200 plus shipping
Photos and more info in link: https://fortmyers.craigslist.org/lee...463124705.html
239-443-8233
VIP Member
02-04-2018, 05:09 PM
#6
Registered
Thread Starter
Zero Hours, this motor was rebuilt a few years ago and never run since. Not sure of original hours but I was told it was low.
Just been sealed with rockers loosened and occasionally rotated. Needs to be filled with oil, primed, dressed out and installed!
Just been sealed with rockers loosened and occasionally rotated. Needs to be filled with oil, primed, dressed out and installed!
02-09-2018, 02:24 PM
#8
What is the compression ratio and did Ron Sprol rebuild the motor or someone else? What components are new? Also is this a standard deck height motor - hard for me to tell from photos. Thanks.
