Motor parts and other whatnots
#1
VIP Member
VIP Member
Thread Starter
Motor parts and other whatnots
Misc. parts from low hour 580s w 30hrs of run time. 1 GM bowtie tall deck 10.2 block 4.530 bore, had cold water crack in the outer water jacket last year and I epoxyed it and ran it in my boat for most of the summer (can be welded) motor was a 580/740hp N/A
$500 (more than likely sold, getting quote for shipping) 16 sets of Lunati 72531 Hi Rpm Hyd roller lifters, $800, 2 Cloyes double roller adjustable timing sets/3710A 3710b, 2 sets of Scorpion 1.7 roller rockers $300, 4 sets of Brodix br1230 stud girdles $500, 2 Melling M77HV oil pumps with welded/trussed pickups, $50, 2 sets of 4.530 forged aluminum flat top single relief pistons, 8 Icon 950-030, and 8 Probe pat#?(one set sold, getting quote for shipping) But same specs as the Icons. $200/ set. 32 Competion Products 9.100 .080 wall push rods $75, 16 Ferrea 2.30 SS int and 16 Super Alloy
1.88 exh valves (lots of meat left) $150 for intakes, $300 for exhausts.
Also have 2 custom grind marine std rotation cams; see cam card. 2 HP couplers from HP application, beautiful splines, no wear.
PM for further details and or questions: buyer pays shipping, parts are BRO. Thanks.
Last edited by Rhythm and Blues; 07-17-2018 at 02:54 PM.
#10
VIP Member
VIP Member
Thread Starter