https://cimg2.ibsrv.net/gimg/www.off...e2bf4b626.jpeg
https://cimg3.ibsrv.net/gimg/www.off...5ecbcae64.jpeg
https://cimg8.ibsrv.net/gimg/www.off...191c2d870.jpeg
https://cimg7.ibsrv.net/gimg/www.off...60c923ccf.jpeg
https://cimg9.ibsrv.net/gimg/www.off...4404a5699.jpeg
https://cimg0.ibsrv.net/gimg/www.off...c8005870b.jpeg
These parts will be in within two weeks. This is just a quick breakdown of some of the items I have coming in. When everything comes in I will update.




- (2) Bravo 1 1:50 LWP $2,200 each or $4,000 for pair

- (1) Alpha 1 Gen 1 - bad upper gear set, lower seems to be ok $300

- (1) XR Upper housing $700

- (4) Standard bravo upper housing $550 each

- (4) Standard bravo lower case $500 each 1 of them needs a new skeg $400

- (1) LWP Bravo Lower case $700

- (2) HD transom assembly $1,000 each $1,700 pair - tight pins, freshly rebuilt

- (1) HD transom assembly $1,500 - felt tight

- (1) HD transom assembly PARTS ONLY $500

- (1) Marine Machine full hydraulic steering - helm to rams $2,800 off of a 37’ Active Thunder

- (1) set 280 tabs $1,000

- (1) Livorsi controls with trim $750

- (1) Set Marine Machine sea strainers $350 each $650 for pair

- (1) Set Gil sea strainers $175 each or $300 for pair

- (1) Billet battery box $125

- (1) Mercury Racing trim indicator panel $100

- (4) Cross over kit - cross over and outlet housing $175/kit or $300 for pair

- (2) set 500 EFI CMI header tail pipe $350/ set or $600 for both

- (2) trim pumps $150 each

- (2) Speed master pumps $400/ pair

- (2) Standard oil pans $125 each

- (2) Standard cast aluminum oil pans $175 each

- (2) Milodon oil pans $225 each

- (2) 1” prop shaft $125 each

- (4) 496 sea pumps $75 each

- (6) Mark series pumps $125 each

- (4) Top cap $50

- misc Alpha / Bravo tools $400

- (3) Brand new in box 24 degree ignition module $225

- (2) Bravo couplers - low hour $225 each

- (4) Brand new circ pump $75 each

- (4) Blower pulley $100 each

- (5) Power steering pump $100 each

- (2) Boat side engine harness from 37’ Active thunder $100 each

Std
i have 3 XR lowers

Rob it’s a std back , non swept.

Yes 300 blue set of Gil strainers sir.

Controls
MM sea strainers are spoken for

Do you still have any sea strainers?

Invisible? Pretty sure I replied to your PM stating they are yours once they come in. Wish not to havevthem I’ll put next in line for them.

Any power steering pumps

Bought 7/8 of them. 3 are brand new. Have 3 In house right now.

New or the used i have right now?
Pick up for pallets is Thursday and will be here following wensday.

Got any stainless trim rams for B1?

I don’t believe so

150 for 2

Parts will be in next Thursday

Do you still have two new water recirc pumps?

Should still be on the shelf at home

Only have a cap, no gear sets on main gears no pinion gears.

At my buddies place in TX, I’ll het him to box them up

Mike,
I’d like to see the cross over set ups. May be interested in a pair for BBC. Do they include the thermostat housing and bypass?
May be interested in the pair if Gil strainers, however that works out for ya.

I have a few of them

I have a 2 set ups matching but not by pass set up.
only set ups I have that are by pass are on motors. Not a big deal I can swap them out if needed.
no strainers left as of right now

looking for bravo 3 26p props. Any leads on s set?

Hey do you have any -2 vertical shafts?