OMC, Evinrude, BRP -- Raker 14 1/2 x 22 Raker 394754 - $200
05-12-2015, 01:15 PM
#1
Registered
Thread Starter
iTrader: (2)
Join Date: May 2012
Location: Gibraltar, MI
Posts: 720
Likes: 0
Received 0 Likes
on
0 Posts
OMC, Evinrude, BRP -- Raker 14 1/2 x 22 Raker 394754 - $200
Part # 394754. Bought this a couple years back to test on my Four Winns 221 Liberator. Now that I have rebuilt the engine and have more power this is not enough pitch. Extremely low run time, basically prop tuning.
V6-8 RAKER 14 1/2 inch diameter x 22 inch pitch propeller.
Three hub exhaust. 3 blade. Stainless Steel.
Recommended for High Performance Bow Lifter,Bass Boat or High Performance Runabout at speeds of 50-62 MPH.
For use with the following engines:
V-6 150-235 HP. and 2.6 litre.
V-4 with V-6 Gearcase, 100-140 HP.
V-8 250-300 HP, and 3.6 litre.
Technical Description Details: The custom cupped high rake blades provide superior bow lift and make your bass boat or high performance runabout plane fast and run fast. Made from aircraft quality stainless steel.
$200 OBO
V6-8 RAKER 14 1/2 inch diameter x 22 inch pitch propeller.
Three hub exhaust. 3 blade. Stainless Steel.
Recommended for High Performance Bow Lifter,Bass Boat or High Performance Runabout at speeds of 50-62 MPH.
For use with the following engines:
V-6 150-235 HP. and 2.6 litre.
V-4 with V-6 Gearcase, 100-140 HP.
V-8 250-300 HP, and 3.6 litre.
Technical Description Details: The custom cupped high rake blades provide superior bow lift and make your bass boat or high performance runabout plane fast and run fast. Made from aircraft quality stainless steel.
$200 OBO
Last edited by BBCLiberator; 05-12-2015 at 01:19 PM.
