Livorsi LED Position Indicator 4 Slot
08-14-2019, 01:39 PM
#1
Registered
Thread Starter
Livorsi LED Position Indicator 4 Slot
For sale is a Livorsi LED Position Indicator. This is the premium 4 Slot LED Indicator.
This state-of-the-art indicators by Livorsi Marine, Inc. are capable of reading CAN Bus protocols such as SmartCraft® (with Gateway), NMEA 2000® as well as 0-5 volt or resistive-type (ohms) inputs. The technology used for these indicators can be applied to a wide range of applications such as trim tabs, drives, jackplates, rudder indicators, water level, or fuel level.
The included plugs are for the can network setup, but I was speaking with Fred at Livorsi tech support and they can provide the plugs for an analog or NMEA setup.
This 4 position indicator is labeled for 2 Drives and 2 Tabs. This Led indicator run around $1300
PM with any questions-
$800 or best offer.
Mounting Templates, instructions, parts etc can be found on Livorsi's website. Fred in Tech support is great to work with.
Livorsi Marine, Inc. - LED Position Indicators
This state-of-the-art indicators by Livorsi Marine, Inc. are capable of reading CAN Bus protocols such as SmartCraft® (with Gateway), NMEA 2000® as well as 0-5 volt or resistive-type (ohms) inputs. The technology used for these indicators can be applied to a wide range of applications such as trim tabs, drives, jackplates, rudder indicators, water level, or fuel level.
The included plugs are for the can network setup, but I was speaking with Fred at Livorsi tech support and they can provide the plugs for an analog or NMEA setup.
This 4 position indicator is labeled for 2 Drives and 2 Tabs. This Led indicator run around $1300
PM with any questions-
$800 or best offer.
Mounting Templates, instructions, parts etc can be found on Livorsi's website. Fred in Tech support is great to work with.
Livorsi Marine, Inc. - LED Position Indicators
