Remote Oil Filter Mounts
 

https://cimg6.ibsrv.net/gimg/www.off...ebcfe9258c.jpg
https://cimg7.ibsrv.net/gimg/www.off...58e4402cb7.jpg
https://cimg9.ibsrv.net/gimg/www.off...73b6e8491b.jpg
https://cimg0.ibsrv.net/gimg/www.off...ca1c568a5b.jpg
https://cimg2.ibsrv.net/gimg/www.off...3a1d492f33.jpg
I have two new remote oil filter mounts
From "Trick Marine" (probably still a bad word)
They have 3/4" NPT in and out, problem is the oil filter thread is unusual at 1", could likely be changed to a more common size
$100.00 CDN for the pair pus ride
Located in Ontario
Thanks Jason

what is the thread count on the filter thread?

1"-12?

Thanks Mike! I appreciate the support
SS496, not sure on the thread, I'll sneak out at lunch and take a look

Easy to look up filters on the WIX site. Just need to know the dimensions.

1" x 14 TPI x 3.840" ID of the mating surface

Bummer.

Thanks for clarifying...I was hoping it was 1-12.

Good luck with sale.

You're welcome
Thank you,
maybe someone will need it for their log-splitter or something

So as I have been assembling my project (and cleaning out the shelves at the same time) I came across a couple of threaded inserts to oil filter blocks. I removed the goofy threaded inserts and the correct ones screwed right in.
Now the filter blocks will accept HP4 filters
$100.00 CDN plus ride
Thanks Jason

Pm sent

I will take them if DD doesn't.

Tks
john

Sold to Diamond Dave
Thank you