Parting 96 fountain short stagger SSM boat
#1
Gold Member
Gold Member
Thread Starter
iTrader: (5)
Join Date: Oct 2005
Location: Olmsted Falls,Ohio Marblehead,Oh
Posts: 11,634
Likes: 0
Received 204 Likes
on
132 Posts
Parting 96 fountain short stagger SSM boat
Bought a 96 fountain 42, short stagger with SSM and blower engines
Sits on a 96 Myco galvanize trailer just made trip back from New Orleans area.
Boats located Olmsted falls Ohio now
Boat looks amazing but got rot and termite damage then he let it sit for 6 years while starting to take it apart and decided he was too busy to take it on after he spent so much building it the first time
Hull needs completely redone front to back... internally anyway the exterior and interior is mint.... sun would get interior bleached and new again needs cleaned the paint is amazing looking and super high quality job...
Hull and trailer stripped of power and drives all parts in bulge taken out, no steering no gauges or anything at helm. 12,000.00 for both hull and trailer have title for trailer and registration for the boat is the “title” he said in New Orleans, I have all contact info for past owner if needed.
Engines are 502’s with GM heads gen5 blocks, and weiand 256 blowers, KE valve covers and comp cams steel rockers, approx 80 hours since built run good! Carbs need rebuilt since they sat but both fired great and have great oil pressure, flame arrestor to pan with all accessories and wiring, no exhaust nothing from bell housing back... that stuff is sold seperate
I see no reason these gave any more tone then he told me, they look like new still...
17,000 for pair obo picked up 44138 I don’t wanna split them at this point. I have videos of them running no warranty of any sort, I only know what told but man these look amazing and sound perfect
SSM III CONVERSION inner and outer transom assemblies, trim cylinders and drives, drives are all black 1.58 ratio and tie bar, drives are crescent not the early 3’s 12,000.00 picked up
72c Transmissions 2 are plug in and one is driveline style
Plug ins 1250 each picked up
Driveline 1500.00 picked up
Trim pumps 225.00 each new style plastic reservoir
Full set gaffrig gauges 2 of each tachs, oil pressure, oil temp, water temp, boost, volts, fuel pressure, water pressure, fuel level, 650.00 for all Gauges looks brand new still
Full hydraulic Latham steering 2500.00 helm to rams
That’s some of it see parts ask, if hull don’t sell I will then strip and sell things off that, cash talks, don’t like it move on...
I still have lots of parts from other boats too... ask or Pm me
Sits on a 96 Myco galvanize trailer just made trip back from New Orleans area.
Boats located Olmsted falls Ohio now
Boat looks amazing but got rot and termite damage then he let it sit for 6 years while starting to take it apart and decided he was too busy to take it on after he spent so much building it the first time
Hull needs completely redone front to back... internally anyway the exterior and interior is mint.... sun would get interior bleached and new again needs cleaned the paint is amazing looking and super high quality job...
Hull and trailer stripped of power and drives all parts in bulge taken out, no steering no gauges or anything at helm. 12,000.00 for both hull and trailer have title for trailer and registration for the boat is the “title” he said in New Orleans, I have all contact info for past owner if needed.
Engines are 502’s with GM heads gen5 blocks, and weiand 256 blowers, KE valve covers and comp cams steel rockers, approx 80 hours since built run good! Carbs need rebuilt since they sat but both fired great and have great oil pressure, flame arrestor to pan with all accessories and wiring, no exhaust nothing from bell housing back... that stuff is sold seperate
I see no reason these gave any more tone then he told me, they look like new still...
17,000 for pair obo picked up 44138 I don’t wanna split them at this point. I have videos of them running no warranty of any sort, I only know what told but man these look amazing and sound perfect
SSM III CONVERSION inner and outer transom assemblies, trim cylinders and drives, drives are all black 1.58 ratio and tie bar, drives are crescent not the early 3’s 12,000.00 picked up
72c Transmissions 2 are plug in and one is driveline style
Plug ins 1250 each picked up
Driveline 1500.00 picked up
Trim pumps 225.00 each new style plastic reservoir
Full set gaffrig gauges 2 of each tachs, oil pressure, oil temp, water temp, boost, volts, fuel pressure, water pressure, fuel level, 650.00 for all Gauges looks brand new still
Full hydraulic Latham steering 2500.00 helm to rams
That’s some of it see parts ask, if hull don’t sell I will then strip and sell things off that, cash talks, don’t like it move on...
I still have lots of parts from other boats too... ask or Pm me